Signs
In our shop, we cut vinyl graphics on what piece of equipment?
Summa
______ is the difference between what was spent to perform the work and what was collected.
Profit
The only way to know what type of paint is on a structure is to ______.
Have it tested
Which of the following methods is not recommended for lead-based paint removal?
Heat guns, Wet scraping, HEPA sanding, Dry scraping
Dry scraping
What may require additional materials and time on a work site for the painter?
Wallpaper & staining
We use this machine for printing digital graphics
Roland
) On the average, how much coverage will a gallon of paint cover?
400 square feet
_____is a possible cause of peeling.
Excessive moisture under the paint
The abatement process that may be particularly useful with mantels, trim, and doors that have historic or architectural significance is _______.
Removal
) What is often found in shady area’s ?
Mildew
What file extension do we use for full color printed graphics?
EPS
Determining the type and amount of material required to complete a painting job is referred to as a _______.
Take off
What gloss level is most resistant to mildew and mold?
Gloss
Enclosures of lead paint should be designed to last _______
20 years
Concrete block and stucco require at least _____ days of dry summer weather to cure sufficiently
30
Name a brand of vinyl we use here in shop
Avery, 3M, Oracal
Acrylic latex paints help reduce the possibility of checking by_____
The elastic properties in the paint
What contributes to high humidity levels inside of a house?
Bathrooms, cooking, laundry
Encapsulation abatement procedures are called interim controls because _______.
The lead-based coating is still present in the structure
The plot (site) plan describes the ____
Location of the structure on the lot
What is the plastic material called that we use for lawn signs?
Coroplast
name a consumable?
Rags, sandpaper, paint, tape, vinyl
Why can you not use interior paints on an exterior paintjob?
They do not have protection from UV rays
) Replacement abatement is considered a very desirable solution because it _______.
Offers a permanent solution to the lead problem
Dimensions shown on architectural drawings are usually given in ________.
Feet and inches