7 STEPS
What is the 1st step to spill response?
Assess the risk
True or False: You should always use the buddy system before starting cleanup.
TRUE
What materials are used for controlling/confining a spill?
Oil Dri
Socks
I am a tool used for scooping and moving material but be careful to not use metal when cleaning solvents.
Shovel
Taking responsibility for ourselves and others is Step __ (#) of Spill Response.
Step 2-Protect yourself
What form of communication should be used for immediate notification of the spill/requesting assistance?
Radios!
True or False: You do not need the same level of PPE while stopping and containing the source as you do during clean up.
False!
I am yellow, black and grated to catch liquids from a leaking container.
Containment Pallet
What is the 7th step to Spill Response?
Report the incident; immediate supervisor, manager, local SRQ.
What should be referenced when determining the correct level of PPE for clean up?
SDS and/or ERG
Tilt/roll the drum so the leaking side is upright.
Where are spill clean-up materials located?
Spill kits near any potential area for spills.
What steps should be followed prior to Clean-up?
Step 3-Stop the source
Step 4-Confine the spill
What is the best way to isolate the area and keep people away from the spill/hazard?
Mark your hot zone.
Three techniques for controlling spills
Diversion
Diking
Retention
I am a solvent spill mixed with oil dri, what recovery container are you placing me in.
Steel drum
Removing all accumulation of hazardous materials on PPE is Step __ (#) of Spill Response?
Step 6-Decontaminate
Section ___ (#) of the SDS provides Exposure Controls & Personal Protection information for cleanup.
8
What item inside the spill kit helps determine the hazard level of the spilled material?
pH strips/ERG book
I am yellow and my storage capacity is 95 gals.
Overpack (Recovery drum)