Hardware
Lumber
Cutting Tools
Attaching / Shaping Tools
Miscellaneous
100
A type of screw that is used to attach hardware to wood
What is a wood screw?
100
The lines within wood that show its growth pattern.
What is the grain?
100
A stationary saw that cuts wood at an angle/bevel. Sometimes called a chop saw
What is a Miter saw?
100
A powered shaft-like tool for attaching or making holes in firm materials by rotation.
What is a drill?
100
A wooden or plastic measuring tool that is usually 1 foot long and has measuring increments marked on it.
What is a Ruler?
200
An L-shaped metal piece used to strengthen a joint or attach set pieces to the floor
What is an Angle Bracket?
200
1/8” plywood that is flexible and light.
What is Lauan?
200
A stationary circular saw within a table mainly used mainly cut long pieces of wood and plywood
What is a Table saw?
200
A screw that has a head with crossed slots (like a plus symbol.
What is a phillips head screw?
200
The back or side of the cutting surface that holds materials in the blade or guides the path of the wood
What is a fence?
300
A type of heavy-duty bolt used to attach platforms together
What is a Carriage Bolt?
300
Thin sheets of wood laminated together to form a single sheet of wood that is strong and ready to build with.
What is Plywood?
300
A hand-heled electrical saw that has a reciprocating blade and can cut curves, uneven lines, or straight lines
What is Jigsaw?
300
Named for its shape and used to hold platforms together or secure wood pieces during the construction process
What is a C-Clamp?
300
The amount of pressure used to push stock through a cut or a blade into stock.
What is Feed Force?
400
Hardware used on a carriage bolt along with washer to secure it in place
What is a Wing or Hex Nut?
400
A type of sheet good that is made by collecting the sawdust ant particles from the wood manufacturing process and mixing it with glue, heated and rolled into large sheets.
What is MDF or Medium-Density Fiber?
400
A hand-held electrical saw with a round or circular blade that can make straight or angled cuts
What is a Circular saw?
400
A high speed electric tool that cuts types of pattern or groove into the edge of the wood, or follows a pattern or template and cuts into the wood. 
What is a Router?
400
a piece of wood that holds the wood against the fence to keep fingers from the blade path.
What is a Guide / Feed stick ?
500
A type of hinge that is used to attach flats to each other
What is a Loose Pin Hinge?
500
Defects to the surface or shape of a cut board, diminishing its usefulness.
What is Knots, wain or bow?
500
Cutting with the grain of a piece of wood
What is rip?
500
attached to a table to make working on a prop or other thing easier since it is like another person holding it or having an extra hand
What is a vice?
500
The bottom number in a fraction that represents the number of possible parts in the whole measurement unit
What is a Denominator?