Destruction
RTDs
HLD
RLD
Safety
100

What is the maximum batch size for destruction?

100

100

What does RTD stand for?

Rack-level
Tamper
Detection

100

True or False: You must verify the rack asset and host asset you're working on before beginning to remove drives

True

100

What (logical) tool do you use to console into a switch?

PuTTY

100

What does PPE stand for?

Personal

Protective
Equipment

200

What (logical) tool is used for destruction?

Mobility

200

How long can a RTD be suppressed for?

90 minutes

200

When you scan serial numbers, what is Boost checking for in the back-end database?

The list of serial numbers & the quantity of drives

200

What does rPDU stand for?

Rack
Power
Distribution
Unit

200

What is the minimum ANSI cut level required for gloves?

ANSI 105 Level A2

300

What is the minimum batch size for destruction?

There is no minimum

300

What is a "Cable Out of Bounds" alarm?

When the reported length of tether has been made shorter or longer than original recorded value

300

After you have removed and scanned all media, Boost indicates that one drive was not accounted for. What is your next step?

Perform another internal and external sweep of the host

300

What does LRU stand for?

Lowest
Replaceable
Unit

300

Hearing protection rating must be:

NRR rating or international equivalent 22+

400

True or False: We can destroy Raspberry Pi

False

400

What triggers a "No Heartbeat" alarm?

Generated when the system does not receive 3 consecutive heartbeats from the RTD

400

True or False. Unplugging a single host will never trigger power-related alarms

False

400

What is Red Media?

All storage devices that have entered the Red Zone and have not been sanitized

400

Safety glasses/eye protection rating must be:

ANSI Z87+,EN 166, or local equivalent

500

What do you do when you logically destroy a drive(s) but not physically destroy it? (Machine failure)

Cut a state change TT

500

What is the interval that the RTD reports device status/health?

60 seconds

500

Where can the Host PSU be located?

Front of the rack/host, back of the rack/host

500

What system does Mobility use to check rack status?

InfraDB

500

Safety shoes rating must be:

ATSM F2413 or local equivalent