Show:
Wheels and Tires
Steering
Alignments
Suspension
GWC Automotive Shop
100
Made from rubber and filled with air.
What is a tire?
100
Round and is connected to the steering colum.
What is a steering wheel?
100
Before aligning a vehicle you must check the pressure in.
What are the tires?
100
Connects control arms to the steering knuckle.
What are ball joints?
100

We removed the rack and pinions from what cars.

What is Kia Soul, Kia Sprtage and Kia Forte?

200
Where on the car you find recommended tire pressure
What is on the door placard?
200
A parallelogram steering and _______ and pinion are different types of steering systems.
What is a rack?
200
You turn this to change the toe.
What is adjustment sleeve, or inner tie rod?
200
Has a coil spring and a shock together as one piece.
What is a strut?
200

All the colors of the tool carts.

What are Red?

300
Tire wearing in the center of the tread.
What is over inflation?
300
On a parallelogram steering system you will have a pitman arm and an _______ that are parallel to each other.
What is idler arm?
300
How far the top of the wheel leans in or out.
What is camber?
300
Used as the suspension for most rear wheel drive or heavier duty vehicles.
What are leaf springs?
300

The name of the comanpany you use to balance a wheel or perform an alignment.

What is Hunter?

400
There is a vibration at 60 mph.
What are wheels need balanced?
400
The __________ connects the rack and pinion to the outer tie rod.
What is inner tie rod?
400
You attach 4 of these to the wheels of a vehicle to set it up for an alignment.
What are alignment machine heads?
400
If your car bounces up and down a bunch when you push on the bumper.
What is your shocks are wore out?
400
Do not put your hand here before spinning a wheel or do not throw these in the shop.
What is inside the rim or rocks?
500
Tires are cupping or feathering.
What are worn shocks/struts or ball joints
500
Connects to the wheel and hub assembly.
What is steering knuckle?
500
______ toe is when the front of the tires are pointing inward toward the center line.
What is positive?
500
3 types of springs suspension.
What are leaf springs, coil springs and torsion bars?
500

Was the first vehicle we put on the new alignment machine.

What is GWC Shop Car?