Before aligning a vehicle you must check the pressure in these.
What are the tires?
The number of overhead doors in the swcc automotive area. (including the collision area)
What is 6?
Where on the car you find recommended tire pressure
What is the door placard?
Steering system that has replaced several traditional steering box systems
What is a rack and pinion?
The number of lifts in the Swcc automotive area. (including collision)
What is 6?
component that bolts directly to the bottom of a steering box.
What is pitman arm?
This is how far the top of the wheel leans in or out.
What is camber?
The brand name of the equipmemnt you use to balance a wheel or perform an alignment.
What is Hunter?
These 3 things must be done before balancing a tire and wheel assembly.
What is cleaned, inflated to the proper PSI, and old weights removed?
The __________ connects the rack and pinion to the outer tie rod.
What is inner tie rod?
If your car bounces up and down a bunch when you push on the bumper this component is wore out.
What are shocks?
This is the person we want to keep happy while we are in the shop.
Who is Sue Claiser?
3 things that can cause cupping.
What are worn shocks/struts, ball joints, Lack of rotation, out of balance?
hub assembly is mounted in this.
What is steering knuckle?
These are the 3 types of spring suspension.
What are leaf springs, coil springs and torsion bars?
Year, make, and model of Professor Vogel's red drag car.
What is a 1969 Chevrolet Camaro?