Show:
Suspensions
Steering
Alignment
Power
Duh!
100
suspension system used for rough service
What is equalizing beam suspension (walking beam )
100
difference between full power and power assist is
What is must revert back to manual steering
100
wheel base is measured from center of steer axle to __________
What is center of rear axle or center of rear tamdens
100
Mr. Bruder's middle name
What is Paul
100
weight not supported by the suspension
What is unsprung weight
200
it stabilizes, cushins, maintains spacing and provides smooth ride
What is the suspension system
200
pattren u-bolts on axles are torqued in
What is criss-cross pattren
200
excessive positive camber will cause tires to wear __________
What is outside edge of tire
200
2 types of power steering pumps
What is roller and vane
200
allows for variation in spring lenght between jounce and rebound
What is a spring shackle
300
most comon type of spring set-up used in curent truck suspensions
What is a comb air/leaf spring
300
lilerally means bump
What is Jounce
300
unequal camber from left to right side but with-in specs are for what
What is road crown
300
what ever oil goes in must come out
What is positive displacement pump
300
spring used for full loads but has no weight on it when truck is empty
What is a helper spring
400
most double convoluter air springs have inside them
What is a bumper
400
2 3/4" of movement for what size steering wheel
What is a 22" steering wheel
400
reactive response of a spring
What is rebound
400
control peak pump pressure
What is a pressure relief valve
400
varying the effective lenght of the spring with the use of cams or hangers
What is a variable rate spring
500
air ride suspinsions are often refered to as
What are adaptive suspensions
500
intersection of center line of rear tamden axles extended out and where the center line of the 2 steer tires extended out and intersect on a turn
What is Ackerman Geometry
500
tractor-trailer comb. that don't unhook experience steering problem because of this
What is lack of grease on the fifth wheel plate
500
flow and pressure must be checked at __________
What is operating temp.
500
term used to describe the end of a spring that attaches with a pin thru the curled end
What is a eye and slipper