The frequency of each charge with one kiln.
What is every 12 minutes?
The cavity connecting the primary chamber (kiln) and SCC1.
What is Crossover 1?
The main purpose of the Boiler.
What is to cool the gases?
The gases go here when they are not up to temperature.
What is the bypass?
The type of metal that the AGR is made out of.
What is Hastelloy?
The two components of the kiln used to provide more air.
What are Atmospheric Gate and Bullhorn?
The full name for SCC 1 & 2.
What is the Secondary Combustion Chamber?
The number of tubes inside of the boiler.
What is 250?
Where the sorbent is made.
What is the Direct Sorbent Injector (DSI)?
The three main functions of the cat toys in the AGR.
What is to absorb microplastics, act as a splash guard, and disrupt the flow of the gases.
The name of what is sprayed to cool down the material inside the hopper.
What is the Hopper Fog?
The gas being eliminated in SCC1.
What is Carbon Monoxide?
The byproduct of the boiler.
What is steam?
The device that helps remove the sorbent off the walls of the baghouse.
What is the vibrator?
The desired PH range of the gases in the AGR.
What is 5.5 - 6?
The door through which the primary chamber is accessed.
What is the Maintenance/Inspection/Access Door?
The temperature of the gases leaving the SNCR.
What is 1700 degrees?
The name of the water that is filtered by the Reverse Osmosis System (RO).
What is purple water?
The length of the sock filters.
What is 22ft?
The three types of filtrations in the carbon bed.
What is Candlestick, Carbon, and HEPA?
The type of combustion air used in the primary chamber (kiln).
What is Starved Air or Sub-Stoichiometric?
The purpose of adding process water (brine) and ammonia in SCC2.
What is process water cools & settles fly ash while ammonia scrubs and neutralizes NOx.
The two chemicals added in the Reverse Osmosis process.
What are Phosphorus Polymer and Chlorine Dioxide?
The name of the system that monitors leaks in the baghouse.
What is the Bag Leak Detection System (BLDS)?
The name of the system that measures the quality of air exiting the good stack.
What is Continuous Emissions Monitoring System (CEMS)?