DECONTAMINATION
WHEN DONNED APPROPRIATELY WHAT ARE THE 6 FORMS OF PPE
SHOE COVERS, GOWN, BOUFANT, FACE MASK, FACE SHIELD, GLOVES
REQUIRED FOR EVERY RIGID CONTAINER, PRE-PROCESSED ONES ARE A BIG NO NO
BOX LOCKS
THE FIRST LOAD OF THE DAY SHOULD CONTAIN THIS TEST PLACED OVER THE DRAIN ON A STERILIZATION RACK
BOWIE DICK TEST
EVERY TECH IS RESPONSIBLE FOR UTILIZING RESOURCES LIKE ONE SOUCE FOR WHAT KIND OF INFORMATION
IFUS
HYPO
BELOW, LOW, DEFICIENT
THESE CLEANING TOOLS ARE DISCARDED AT THE END OF YOUR SHIFT
BRUSHES
THESE ARE REQUIRED INSIDE EVERY SET. FOR RIGID CONTAINERS TWO ARE PLACED IN OPPOSITE CORNERS OF EACH LEVEL OF TRAY. FOR WRAPPED ITEMS ONE ITS PLACED IN THE CENTER OF EACH LEVEL
CHEMICAL INTEGRATOR
BEFORE PUSHING THE LOAD INTO THE AUTOCLAVE EVERY ITEM SHOULD BE INSPECTED FOR A LABEL, STICKER , DART TEST AND THIS ITEM THATS COMMONLY FORGOTTEN
EVERY TECH IS RESPONSIBLE FOR UNDERSTANDING AND FOLLOWING POLICIES PUT IN PLACE BY THIS ORGANIZATION
AAMI
CARDI/O
RELATING TO HEART
THIS ITEM IS A REQUIREMENT TO SET AND USE TO FOLLOW SPECIFIC SOAK TIMES FOR EVERY SET
TIMER
WHAT THREE ITEMS SHOULD BE INSULATATION TESTED
Laproscopic Instruments, Bipolar Forceps, and Cords
When reading the sterilizer receipt what three areas are you checking for to make sure the cycle ran successfully?
Time, Temperature and Pressure
WHAT DOES R.A.C.E STAND FOR?
RESCUE, ALARM, CONTAIN, EVACUATE
RETRO
BEHIND OR BACKWARDS
THESE ITEMS SHOULD BE SEGREGATED AND FLUSHED WITH A SYRINGE WHEN MANUAL CLEANING
CANNULATED INSTRUMENTS
YOU SHOULD INFORM YOUR MANAGER WHEN MISSING INSTRUMENTS CANT BE FOUND FROM THIS AREA
BONE YARD
What is the acceptable PSI range for an autoclave?
15-30
IN CASE OF A FIRE OR OTHER EMERGENCY WHERE IS THE DEPARMENTS MEETING PLACE?
ON OWNEN AND PINE (BIKE RACK) OR DIRT PARKING LOT ON MCCORMICK
-PLASTY
SURGICAL REPAIR
ALL STRINGER INSTRUMENTS SHOULD BE PLACED ON A WASHING CRADLE SO THE JAWS ARE FACING UP BESIDES THESE INSTRUMENTS
THESE CLAMPS SHOULD BE CLIPPED TO A STEAM INTEGRATOR AND NOT HELD OPEN BY ANY OTHER OBJECT
BLOOD VESSEL CLAMPS
AUTO CLAVE TEMPERATURE SHOULD NOT EXCEED THIS TEMPERATURE
273 F
EACH EMPLOYEE IS TO PERFOM MEANINGUL TASKS WHEN CURRENT ASSINMENT IS COMPLETE THIS IS AN EXAMPLE OF WHAT?
TIME MANAGEMENT
-LYSIS
Decomposition, destruction, or breaking down.