Lab/Quality
Team members certified to run COAs must do a cross check_____
Monthly
What is a concern when rolling on belts?
Pinch Points
This is the best way to insert foam earplugs.
Roll them up, then slowly insert into the ear.
This is the first step in the sequence of Lock, Tag, Try procedures.
Verify the correct on/off controls for equipment to be locked out.
This form is filled out prior to performing an uncommon or non-repetitive task.
PJHA
Information about chemicals that we work with can be found where?
SDS
If using an extension cord what else do you need to use?
GFCI
Name four pieces of PPE required when blowing down equipment using compressed air.
Dust mask, goggles, safety boots, hard hat
This color lock is not for personal use, but rather as a safety lock to maintain equipment in a safe position.
What is a yellow lock?
A form to be filled out when multiple TMs are locking out equipment. The form lists the equipment, time worked, energy sources, permits, and a checklist to be completed.
What is a group lockout form?
How much water flour can hold is called?
Absorption
What device is used to lock out the drill press?
Plug lock out
These kind of gloves must be worn when handling Falling Number sample tubes
Cut resistant gloves and latex gloves over that.
A metal clamp with multiple holes that lets several personal locks secure a single isolation point during group Lock-Tag-Try procedures.
What is a Hasp
Required for activities that could create a spark or flame, like using drills or Sawzalls.
Ignition Source User Checklist & Permit
When do we need to use the ATP swaber?
Adverse events
Proper grounding of all electrical equipment is essential to prevent this dangerous event?
What is electrical shock
This piece of PPE is required when working within 15 feet of an unguarded roof edge
Fall protection harness
This color lock is used to mark off out of service equipment.
A black lock
Essential for safe entry into enclosed areas such as bins.
Confined Space Permit
Stainless steel during the ATP swabbing must be under ______.
2,000 parts per million
At what temperature would a bearing be a concern if ambient temperature is 100 degrees?
140 hi and 160 hi hi
This is a tight-fitting respirator that filters at least 95 % of airborne dust, flour, and other particles to protect workers’ respiratory health.
N95 Mask
This is a safeguard (interlock, light curtain, emergency stop) whose correct operation is essential to prevent serious injury or catastrophic equipment damage.
What is a Critical Safety Device
Needed for tasks involving high heat, such as welding outside of the maintenance shop
Hot Work Permit