TECHNOLOGY
PVC Compounds provide strength, stability and rigidity. Impact Modifiers provide impact resistance, preventing dents, abrasions and cracking. Titanium Dioxide blocks potential UV rays to prevent fading.
What is Duratron?
YEAR KAYCAN ESTABLISHED
WHAT IS 1974?
D6 Beveled, 0.050" Thickness, Brush finish, double thick nail hem, dark colors
What is Richmond?
Overlap on panels
What is 1"?
Our production lines run this long
What is 24/7, fifty-one weeks a year?
Acrylic Capstock Resin
What is Acryligard?
TOTAL DISTRUBTION CENTERS IN US
WHAT IS 26?
Available in Bevel or Dutchlap, 0.46" thickness, wood grain finish, dark colors, 25-year fade resistance warranty
What is DaVinci?
This clearance used at all openings and channel stops allows for normal expansion and contraction.
What is 1/4" clearance?
Vinyl Siding is commonly made through this process
What is extrusion or coextrusion?
Protects vinyl siding against distortion caused by heat from the sun.
What is Helios?
PURCHASES FIRST ALUMINUM MANUFACTURING PLANT
WHAT IS 1983?
This type of siding is made from a polypropylene resin using an injection molding process.
What is Perfection Shake?
Proper method and location for fasteners in siding
What is nail straight but not flush in the center of nail slots?
__________ is a thermoplastic resin
What is Vinyl?
Technology to keep color from fading
What is Chromalock?
KAYCAN EXPANDS IN 1989 WITH THIS PLANT
WHAT IS KBP COIL COATERS?
11.875" width x 0.027" thickness makes a ___________
What is a 5" gutter?
This siding requires the first fastener in the uppermost end of the top nail slots to hold panel in position.
What is Board and Batten?
Colored Acrylic Layer
What is capstock?
Coated with a thermo-setting polyester _______________________________ topcoat for a durable and fade resistant paint finish with the highest abrasion-resistant factor on the market
What is Polycoat 9000?
BEGAN MANUFACTURING VINYL SIDING
WHAT IS 1987?
0.050" Thickness, 1/2" profile, low gloss authentic cedar finish
What is Timberlake Board and Batten?
When installing this product allow for 1/4” gap between the top of it and the soffit. Position a nail at the top of the upper slot on both sides leaving a gap of approximately 1/32”. The balance of the nailing should be in the center of the slot, 8” to 12” apart, again leaving 1/32” and should extend 3/4” below the starter strip.
What is a corner post?
This coating used on aluminum allows the product to bend and appears to be vinyl.
What is Solmica?