Stop 6+2
Fire Protection/Prevention
Don't Die
Knowledge
PPE
100
What is one Stop 6+2 item?
§1. Fall
–From height (OSHA 4 ft, T-NSK 6 ft) or into an opening
§2. Caught & Entangled
–Energized Machines, LOTO
§3. Contacting Vehicle
–Forklift/Pedestrian, Company Vehicles
§4. Contacting Heated Items
–Heat Treat, Chemical Reactions Generating Heat, Hot Motors
§5. Electric Shock
–Opening panels without PPE, Exposed Wiring
§6. Heavy Items
–Crane/Mechanical Movement, Team Lifting (40 lb. limit individual)
§7. Lack of Oxygen
–Confined Spaces
§8. Working Alone
–Lone worker situations, low staffed dept, central systems/utility rooms.
100
How many times must you call out "Fire" upon discovering a fire in the workplace?
THREE
100
Three elements needed to cause a fire are ____, ____, & _____.
HEAT, OXYGEN, & FUEL
100
The ____ _____ steps/rungs of an A-frame ladder are restricted from being utilized.
TOP TWO
100
The ______ must pay for PPE
EMPLOYER
200
What does a forklift operator and pedestrian need to make when meeting?
EYE CONTACT
200
This role is implemented to ensure the fire-safety of a building or situation that may pose an increased risk to persons or property during hot work activities.
FIRE WATCH
200
Compressed gases are considered stored properly when the regulator is removed and ___ are placed on.
CAPS
200
The item that states the chemical ID, Health hazards associated, the PPE required, and has pictograms is called a ____ _____ _____.
SAFETY DATA SHEET
200
This is how often PPE should be inspected
BEFORE EACH USE
300
Extension ladders should be set up with a ____ to ____ ratio.
1 to 4
300
This acronym is commonly used to remind employees how to use a fire extinguisher.
P.A.S.S
300
The three roles played in a confined space operation are the _____, ______, & ______.
ATTENDANT, ENTRANT, & ENTRY SUPERVISOR
300
I will follow proper _______ procedures whenever servicing or maintaining machines or systems in which unexpected energy, start-up, or release of stored energy could cause injury.
LOTO
Lockout Tagout
300
This is the height at which fall protection is required in manufacturing per OSHA.
4 FEET
400
True or False - You can use a metal ladder around power lines or exposed energized electrical equipment?
FALSE - You should NEVER use a metal ladder in this circumstance.
400
This class symbol refers to this type of fire -
FLAMMABLE LIQUIDS
400
The acceptable oxygen level is between ____ & _____.
19.5% & 23.5%
400
What should be placed to warn of temporary potential hazards introduced into the workplace? (Removing trench covers, working at height, slips/trips/falls)
WARNINGS & BARRICADES
400
_______ is the first step in the hierarchy of controls, while ______ is the last.
ELIMINATION
PPE
500
Which two STOP 6+2 items are missing from this list?
Fall
Caught/Entangled
Contacting Vehicle
Contacting Heated Items
Lack of Oxygen (Confined Space)
Working Alone
ELECTRIC SHOCK
HEAVY ITEMS
500
This document is required when a source of ignition or flammable material is present or can be a fire hazard regardless of the presence of flammable material in the workplace. Common processes are welding, soldering, brazing, cutting, thawing, brazing.
EVENT BASED HOT WORK PERMIT or ANNUAL HOT WORK PERMIT
500
A confined space must meet these 3 criteria:
1. A space large enough for entry
2. Limited or restricted means of egress
3. _________________________________.
NOT INTENDED FOR CONTINUOUS HUMAN OCCUPANCY
500
Before the operation of any mobile equipment including scissor lifts, THIS must be completed.
EQUIPMENT INSPECTION
500
Anchor points must withstand _______ pounds.
5000 lbs.