PARTS
TRANSMEMBRANE PRESSURE
1 PART BLEACH TO 9 PARTS WATER (1:100)
How long do we wash our hands with soap and water?
40-60 seconds
HOW FULL SHOULD THE ARTERIAL CHAMBER BE?
85-95% FULL
WHERE IS THE HAND CRANK LOCATED?
BACK OF THE MACHINE
WHY MIGHT YOUR MACHINE ALARM TMP?
+/- 0.3
How long can hepatitis B live on surfaces?
Up to 7 days
YOU HAVE A FLOODED TRANSDUCER, WHEN YOU CHANGE THEM YOU NOTICE BLOOD WENT THROUGH TO THE OTHER SIDE. WHAT IS YOUR NEXT STEP.
WHAT DEVICE STOPS AIR FROM GETTING TO OUR PATIENTS?
VENOUS OCCLUDER CLAMP
WHY IS IT IMPORTANT TO ADDRESS ALARMS IN A TIMELY FASHION?
WHEN THE BLOOD PUMP STOPS, IT INCREASES THE RISK OF CLOTTING IN THE EXTRACORPOREAL CIRCUT
WHEN VERIFYING MACHINE CONDUCTIVITY WHAT IS THE ACCEPTABLE RANGE BETWEEN MACHINE AND TCD?
+/- 0.5
WHAT PPE IS REQUIRED TO CLEAN A MACHINE?
AIR EMBOLISMS CAN BE AVOIDED BY ENSURING WHAT IS ENGAGED?
OCCLUSION CLAMP (AIR DETECTOR)
WHAT DOES THE DIASAFE FILTER DO?
MAKES DIALYSATE ULTRAPURE.
WHAT HAPPENS WHEN THERE IS A HIGH PRIORITY ALARM?
RED LIGHT, AUDIBLE ALARM (BEEP, BEEP, BEEP....) BLOOD PUMP STOPS.
HOW MANY CHECKS SHOULD BE DONE OF THE MACHINE SETTINGS AND EXTRCORPOREAL SYSTEM WITHIN THE FIRST HOUR OF THE PATIENT'S TREATMENT?
2 PRIOR TO START OF TREATMENT AND (1) RN TO VERIFY WITHIN 1 HOUR OF THE PATIENT STARTING TREATMENT.
WHAT IS CONSIDERED A LARGE BLOOD SPILL AND WHAT RATIO OF BLEACH TO WATER DO WE NEED TO CLEAN IT?
>10ML ABSORB, THEN1:10, THEN 1:100
TRUE OR FALSE. WHEN RETRIEVING CLEAN SUPPLIES YOU NEED TO BE WEARING CLEAN GLOVES.
NAME THE PARTS OF THE ECC
NEEDLES OR CVC, DIALYZER, ARTERIAL BLOODLINE, VENOUS BLOOD LINE
WHAT COMPLICATION COULD A MACHINE With A HIGH CONDUCTIVITY CAUSE?
HEMOLYSIS, BURSTING OF RED BLOOD CELLS
WHAT RANGE MUST THE PH BE BETWEEN?
6.9-7.6
In order to prevent contamination, we must spike the saline bag or connect the lines, using ______________________ technique.
ASEPTIC TECHNIQUE
POLICYTECH