Class I Sit-Down
Hours for first hydraulic return filter change
What is 250 hours
2.75 - 3.5 IN
How do you find out how many hours are on the lift.
Hold horn, Turn key power on, Enter key code and let go of horn on H.
What is the difference between Class IV and V
Tire Type
How long should you be troubleshooting an issue before you start calling people asking for help.
APX 1.5 Hours
Dark circle on lubrication "spider" chart means this
What is replacement
When should chains be replaced.
Elongation above 3%, Rolled Pins, Broken links
How do you check for error codes.
Hold horn, Turn on lift, enter code on key pad, let the screen scroll until E is displayed on the screen
Per the lubrication "spider" chart what does the roman numeral V stand for
Inspect every 2000 hours (annual)
What hours do we use for warranty.
Key
Tilt pins require this lubricant
What is Molybdenum "Moly" grease
The proper way to test the brake
EPO
How many grease fittings are on a 8HBW23
0
Propeller Shaft requires this lubricant
MP (multi-purpose) grease
What is needed for a warranty claim
Pictures before and after sent to Brett. Screenshots of 4G software if required. Pictures of error codes, Picture of serial numbers
10% wear equals a ___ reduction in capacity on forks
What is 20%
What does test O23 do on a RF1
How many OHMS of resistance should you find when testing the CAN lines
APX 60
What is the boiling point of LPG
-44 degrees Fahrenheit
Where can i find information on what is covered under warranty.
My learning PAL
This component requires use of 10% Moly
What are pump motor splines
How do you run test I23 on an 8BPU
Hold up arrow and enter while turning the truck on
Flashware and Vehicle Manager
What is the reason for pressurizing the cooling system
To increase the boiling point of the coolant
What is the current warranty of the Throttle Body and mixer.
8,000 Key hours