Tech Challenge
What is the name our Tech Challenge Team?
Code Royalty
How many total prototypes did we think of?
8
What is the scientific term for our current model?
Hydraulic Crane
What are the four colors that were filled in each of the syringes?
Red, Blue, Yellow, and Green
What is the diameter of the large target?
10 inches
What our group’s tech challenge team number?
255
What is the name of each tab in our journal (must be in order)
Journal, Commitment, Homework planner, and Accounting
What are we using for our flexible connector to pivot the semibase?
Ball bearings
What function does the yellow syringe perform?
Pivoting the base
What is the area of the small target?
36 inches
What is the name of this years’s tech challenge?
”Raise the Roof”
What was the status of the forklift prototype?
Yellow
What diameter of the base?
Around 17 inches
What mechanisms does the red syringe perform?
Claw Movement (up and down)
What is the diameter of the platform in which the model will be placed on?
24 inches
What day is the tech challenge final showcase date?
April 25 - 26
What is the status of our tech challenge step “Develop and Prototype”
In Progress
What is the model powered by?
Water;Syringes
What function does the blue syringe perform?
Claw grip an attachment through the hooks.
How many large and small targets does our grade have to use.
1 targets and 2 small targets
How many hooks and lifting eyes does the tech challenge housing model have?
4 hooks and 2 lifting eyes
What was our first failure?
Many of the prototype were either too weak or relies in traveling around the rig which limited the amount of prototypes we can use.
How is the claw designed?
A Four way cake with hooks to be manually attached
What mechanism does the green syringe perform?
Claw movement (left and right)
Where are the safety areas of the rig?
One below from the platform, and one to the left and right of between zone 1 and 2 with also zone 3 and 4.