Safety
When working in the lab, what must be worn on the face?
Safety goggles
The first step in the engineering design process is ___
Define the problem
The primary use of a clamp is to do what?
Hold material securely.
What line do you first measure from?
The 0 line.
What did the 1940 Tacoma bridge do before it ultimately failed, falling into the river below.
If injured with the hot glue gun, what is the proper procedure?
Run cool water over the burn, and report to the teacher.
This phase of the engineering design process is where the built product gets put to work
Testing phase
What is the primary difference between a Philips head and a flathead screw driver?
Philips head = + shape
Flathead = - shape
What is 1/2 of 1/2
1/4
___ is the process we use to solve problems and come up with solutions.
The engineering design process.
Long hair, draw strings, other loose objects must be ___ before working.
Secured, tied back, tucked away
What is the purpose of the research phase
In order to gain the necessary information to solve the problem
Typically, coping saws cut on the PUSH or PULL stroke?
Pull.
What is 1/4 of a whole inch
1/4
The red buttons around the room are used for what purpose
To shut off all power in the case of an emergency
What is the most dangerous machine in the lab is the ___
The drill press
An early, small-scale model used to test a design concept is called a ___
Characterized by a thin blade stretched across a deep, C-shaped steel frame, this hand saw is named after its ability to cut tight, curved shapes into wood.
A coping saw
What is the halfway point between 2 1/2 and 3 inches
2 3/4
What was the purpose of making detailed sketches of your projects before building?
What is the reason we don't wear rings or gloves for this purpose (single word, not the reason)
Degloving
What is the use of the engineering design process.
To work through and solve problems.
What is the primary use of the countersink bit in the drill press?
To cut a small, cone shaped recess in the wood.
Double 3/16 of an inch on a ruler.
3/8
What club is Mr. Glover going to be in charge of this year?
Photography club