Peeps
This person is the President of the company.
Who is Greg Lusty?
This is the name of Mohamed's cat.
Who is Charlie?
As an IMP manufacturer, you would need to comply with this chapter of the building code.
What is Chapter 26?
Available for C&I and CS applications, this is the most used panel.
What is DM40?
Equivalent to UL 263, this test is used to determine hourly fire ratings?
What is ASTM E119?
This salesperson is the sister of Natalia
Who is Jackie Rizzatti?
This person has run a half marathon.
Who is Krystal?
What is the International Energy Conservation Code (or IECC)?
This panel used only on roof applications is similar to a specific wall panel, but is covered by a membrane.
What is OneDek?
These two tests are used to determine thermal resistance and transmittance.
What ASTM C518 and ASTM C1363?
This person in Technical has been with the company for 15 years, originally starting as a drafter.
Who is Marco Francisco?
This year is the only version of the International Building Code that directly refers to IMPs.
What is 2024?
These are the panel cores that we offer.
What are PIR, InnovaCELL and Mineral Wool?
FM 4471 is used for roof panels, but this FM approval test is specific to membrane roofs.
What is FM 4470?
This well known person to you has completed two marathons and a 50K.
Who is Brian Ng?
These two tests allow for special approval in section 2603.9 to use foam plastics without needing to comply with sections 2603.4 and 2603.6.
What are NFPA 286 and FM 4880?
This panel type was intended for the winery market, known for it's joint which is not a tongue & groove.
What is CW36?
While we have ASTM E331 testing, this dynamic test is often seen called out within the specifications.
What is AAMA 501.1?
These two people drove from the Vacaville plant to the East Stroudsburg plant?
Who are Sarah Palmisano and Jessica Gallagher?
This chapter covers both the roof slope limitations and the requirement for ANSI/SPRI ES-1 and GT-1 rated edge metals and gutters.
What is chapter 15?
No longer offered, this panel is still within our FM approvals and is known for using OSB within the panel?
What is hardwall (HW40)?
No longer recognized by the building code, this test is often asked for when discussing Standing Seam roofs.
What is UL90 or UL580?