Flight Controls
How many flight control surfaces are there?
8
What are the 2 NAVAIR publications used for hydraulic sampling?
01-1A-17 & 17-15BF-97
What is the primary hydraulic system for the Landing Gear System?
System B
Hot melts are rated for up to _____ degrees.
275
How many total chocks are required per Aircraft?
4
What control do the TEF's provide?
Roll
What does the GMMP not provide hydraulic power to?
Nose Wheel Steering Unit
How many piston(s) does a brake assembly have?
6 pistons
Can rain erosion coatings and rain erosion tape be used together on the same LEF?
No
Name the 3 types of inspections performed in the Aircraft.
Scheduled, Conditional, and Time Limit
What is the LCN for flight controls? (ex. A01)
A27
How long do you pressurize the GMMP to ensure all air is removed?
15 seconds
How many degrees can you manually position the nose wheel?
360 degrees
LO defects not visible from _____ feet away should not be entered into LOHAS.
3
How long is the cool down cycle of the IPP operation?
2 minutes
How many hydraulic system(s) does a STAB EHA have?
2
What fuel cell is the System B reservoir located in?
F2R
What component controls anti-skid and tow braking functions?
Brake Control Unit
What is used to identify what LO goes in specific places?
LOMI (Low Observable Material Identification)
Define the meaning of a Cat I High Action Request.
Define the meaning of a Cat I High AR.
How many degree(s) can the Leading Edge Flaps move in the up position?
3 degrees
How long do you pressurize the GMMP to ensure all air is removed?
15 seconds
How many weight-on-wheel switches are there and where are they located?
5 total. 2 per MLG and 1 for the NLG.
What tool is the most effective for local repair alignment?
A protractor
At _____ degree(s) when approaching the Aircraft is considered the danger zone.
45