SMS Operation
Turning this switch ON applies power to the SMS system
3B
Weapon select switch logic operation is provided for these 2 selections?
A/A Weapon select
A/G Weapon select
True or False: The MC system provides the primary interface between aircraft systems and the SMS.
True
The MC system controls to/from comms with the _____
SMS
Monitor Mass
This component interfaces the weapons station and the armament computer
CSED
True or False: The priority station selected for release may be overridden
True
SMS stores displays are controlled by the ___ system
MC
The _____ uses multiplex data signal processing to interface the MC system and encoder-decoders for the weapon stations
SMS
Who is the principal aircraft maintenance authority in the CF and is responsible for preserving the airworthiness of all CF aircraft.
Technical Airworthiness Authority. The TAA is responsible for the regulation of the technical airworthiness aspects of design, manufacture, maintenance, and materiel support of aeronautical products.
The ______ _______ function is isolated from all armament computer functions and will work when the SMS is off or has failed.
Emergency Jettison
A/G weapons may be stepped by pressing the _____ pushbutton on the stores display
What receives power from the right bus?
Stns 5 thru 9 and Armament Computer
WoW, LDG GEAR Cntrl Handle, All Gear Up and Locked are examples of interlocks that provide what type of signal inputs to the SMS?
Discrete "Thumbs Up" signals
This person normally grants technical airworthiness authorizations to individuals within a MO
Senior Aircraft Maintenance Superintendent (SAMS). They are appointed by the SMM.
Stations 1 thru 4, gun system and AWW-4 are powered from what bus?
left bus
For A/A weapons, the station is stepped one station by pressing the selected weapon switch on the ____ ______ _____ _____
A/C Controller Grip Assembly
When the pilot selects AIM-9, what is sent to the Intercommunication Amplifier-Control?
AIM-9 audio tone, which is then sent to the pilot's headset.
Select Jett is available for all weapons stns with exception to the following:
Wing Tip AIM-9 stations
What are the responsibilities of a POM tech?
POM is the act of physically performing and certifying maintenance by a journeyman technician. This does not include the conducting of airworthiness functions.
What are the SMS BIT modes? Describe each one briefly.
Power-Up : This is the initial BIT. Starts when power applied to the armament computer
Periodic : Auto every 60 seconds when A/C master mode is in NAV
Initiated : Same as Power-Up + has the ability to test electrical fusing power supply and high current drivers in the CSEDs
Maintenance : Tests the switches
Describe what will be selected by using the FWD, AFT, CENTRE (PRESSED), and RIGHT on the A/C Controller Grip Assembly
FWD: AIM-7
AFT: Gun A/A Mode
CENTRE: AIM-9
RIGHT: AIM-120
When MASTER switch is set to ARM and WoW or armament override is set, what is sent to the Armament Computer?
28 VDC discrete ("Thumbs Up") signal
Describe AUX REL and where it is applicable.
Auxiliary release provides a gravity release of stores attached to the pylon BRU-32 when normal release and selective jettison release have failed.
What is a CF942 identification tag, and is it considered a certificate of conformance?
The CF 942 is a supply control document that indicates the disposition of an item that enters the CFSS. This document may be used to identify a part but is not to be used as a certificate of conformance.