"Suited and Booted"
This chart shows the required PPE when handling chemicals to prevent unexpected exposure to personnel.
What is the PPE Grid?
This person is required to sign the line entry section of the permit and observes the initial line break in progress and is capable of summoning emergency assistance if needed.
Who is the Line Entry Observer
This type of Hot Work job in non-exempt areas always require a Hot Work Permit.
What is High Energy Hot Work?
This procedure covers all Eco Services and contractor personnel working on electrical installations, modifications, and/or diagnostic work performed on energized electrical circuits or equipment 50 volts or greater.
What is Energized Electrical Procedure?
All respirators used for routine tasks shall be __________ before each use.
What is Inspected?
Includes: Hardhat, Hearing Protection, Safety Toed Boots, Long Sleeve Shirt, Long Pants, Gloves.
What is Core PPE?
This critical step in the GSWP process requires both the Maintenance/Contractor Rep and the Operations Rep to visit the work area to identify hazards before work starts.
What is the job walk?
This type of Hot Work job only requires a permit if it is in an electrically classified area.
What is Low Energy Hot Work
This type of permit is required when working on electrical conductors or circuit parts that are 50 volts or greater and not placed in an electrically safe work condition before an employee performs work.
What is Energized Electrical Permit?
Exemptions include:
Testing/Troubleshooting/Voltage Measuring/Visual Inspection
Corresponds to the level of contaminant in the air above which a person should not be exposed without respiratory protective equipment.
what is Permissible Exposure Limit (PEL)?
This PPE protects the head, face and neck from potential splash hazards from corrosive chemicals.
What is a splash hood?
This is section of the permit should describe Hazards of the work and list ways to mitigate the hazards.
What is Hazard Identification? (Section 4)
This person is responsible to conduct initial atmospheric monitor readings prior to starting Hot Work or Entering a Confined Space.
What is the Operations Representative?
Occurs when two conductors that should not touch come into contact, allowing current to bypass the intended path.
Short Circuit
Respirator in which ambient air is passed through an air purifying element (cartridge/canister) that removes a contaminant(s).
What is an Air- Purifying Respirator?
This PPE is used when performing work that can cause flying particles or splashing chemicals.
What is a Face-shield?
"Daily Double"
List 3 details that should be included in the Scope of Work?
What is the job?
Where is the job?
How is the work crew accessing the job?
What tools will be used?
This person is responsible for conducting continuous monitoring the the duration of the Hot Work or Confined Space Entry work.
What is a Fire Watch or Hole Watch?
___________ workers cannot open the MCC / Disconnect panel door.
What is unqualified?
No employee shall be fit tested, allowed to work in areas requiring respiratory protection, or allowed to use respiratory protection unless the employee is ___________ within all face-sealing areas.
What is clean shaven?
Required where protection is needed against potential chemical splashes or sprays, operating valves/tools overhead.
What is Chemical Goggles?
This step is required if permitted tools, equipment, job scope, or hazards change at any point in the job.
What is scope change?
Relocation of Combustibles/Flammables – removing combustibles/flammables a minimum of a ____ft. radius from the area where hot work will take place.
What is 35?
An approach limit at a distance from an exposed energized electrical conductor or circuit within which a shock hazard exists.
What is the Limited Approach Boundary?
If supplied air is required to enter a confined space or conjested area then the worker must also carry a ______________.
What is an escape pack?