NxStage System One Set Up
Testing For Residual Bleach Using RC Test Strips
Initiation of Tx with NxStage using AVG/AVF
Termination of Tx with NxStage using AVG/AVF
NxStage System One Monitoring During Tx
100

When you turn on the power switch, what color caution will self test flash that looks like a field goal post

yellow

100

At minimum residual bleach must be tested when?

After any bleach disinfection of a machine.

100

What is the first step you should perform to achieve Hand Hygiene?

What is washing hands

100

What can you give patient if hypotensive prior to termination of HHD tx.

Normal saline


100

What should you make sure is pulsing. If not, reset and verify access pressures are within range?

What is an Access Pod

200

if using a fluid warmer how is this turned on?

plugging it in to NxStage Machine. turns on with power up of Nxstage Machine

200

What must be performed on each bottle of strips

Quality control tests

200

You subtract this from pre treatment weight to calculate difference and achieve a UF goal

What is EDW estimated dry weight

200

Before Rinse back how much normal saline should be in the saline bag?

300-500mL

200

What should be primed and double clamped to prevent accidental infusion of fluid or air?

What is a saline line

300

Insert cartridge into opening of Nxstage machine making sure what face is shown right side up?

smiley Face

300

How long after opening a bottle of RC test strips does the bottle become expired?

3 months from date of opening

300

Attach this to the venous fistula needle line, open clamp and slowly inject. Gently aspirate and flush several times.

What is Heparin syringe

300

At the end of treatment which line do you clamp and return to saline bag to return blood back through extracorpeal circuit to the patient during rinseback?

Arterial

300

What should you check for air and if present remove with a 20mL or 30mL syringe?

what is a Dialyzer venous header.

*flush dialyzer port with 3mL of saline to clear blood and clamp securely

400

What button do you push to begin priming NxStage one system?

Add Fluid

400

Who do you contact if RC test strips do not pas Quality Control test

Technical services and program manager

400

You wait _ to _ minutes before initiation of dialysis to prevent loss of heparin throughout the dialyzer.

3 to 5

400

What button do you push to begin returning blood for rinse back

Add Fluid

400

What should be documented every 30 minutes while monitoring a patient treatment. *Hint* 3 answers.

What is vitals, lines secure to patient and visible, and patient Alertness

500

What lines are known as Spiders that connect to Hanging bags?

MLA multi-line adaptor

500

What colors shown on RC test strip should you assume is at a bleach concentration of 0.5ppm or more

Blue or Brown

500

Increase this as prescribed and monitor arterial and venous pressures to note possible flow restriction

Blood Flow Rate

500

What number is displayed as an amount of mL to rinse back patient before hitting the add fluid button?

277

500

What should you respond to promptly if alerted?

What are alarms and cautions