GD&T
The surface variation that occurs relative to an axis of rotation.
What is Runout?
You attach the Identification Tag to this when your Tool Parts are too small.
What is ID Plate or Pelican Case?
This is one of the 9 teaming elements where team members build positive relationships and establish mutual trust and respect with each other.
What is Trust and Respect?
This production part is one of the components on an airplane that the pilot will interface with in the flight deck.
What is Control Stand?
In February 1968, this German Airline introduced the 737 to the mass markets.
What is Lufthansa?
Whatever GD&T callout that is made, is controlled independently of the size dimension of the part.
What is RFS? (Regardless of Feature Size)
You don't need to assign this item a part number if attached to the tool, attached to UT-7168W document box, or other storage box.
What is TUI? (Tool Use Instructions)
What is a "near miss"?
This production parts main purpose is to transfer motion from the motor output to a rotating table
What is GRA? (Geared Rotary Actuator)
in 1990, the US Air Force took delivery of two specially modified 747-200s to be used primarily as VIP transport aircraft.
What is Air Force One? (VC-25)
What is Datum Simulator?
This CATPart type file collects all Tool Engineering reference interface geometry for a given family of tools.
What is TIM? (Tool Interface Model)
This performance indicator is the percentage throughput of good quality product with no rework or scrap compared to the total throughput of products for an individual process over a specified time period.
What is First-Pass Quality?
Requiring 12 of these in the 777X, this production part enables the flap to move from a stowed cruise position to a deployed takeoff/landing position.
What is Flap Support?
What is 7E7?
This zone, to which geometric tolerance is applied, is limited to the range of the feature specified in the drawing relating to a feature's protrusion.
What is Projected Tolerance Zone?
You would insert this zone callout if a flagnote was located in the Title Block.
What is TB?
This Boeing process is used to identify the root causes in a problem with a goal to eliminate the issues.
What is Boeing Problem Solving Model?
This production part is used to connect the component of an airplane that can deliver up to 134,300 lbf to the frame of the aircraft.
What is Engine Mount?
This Boeing Aircraft was modified extensively with a volume of 65,000 cubic feet to transport Boeing 787 Dreamliner parts between Italy, Japan, and the U.S.
What is the Boeing Dreamlifter?
This principle is based on the premise that a shaft must be able to fit inside a hole which is as deep as the shaft length.
What is Envelope Principle? (Taylor Principle Rule #1)
Some might consider this the table of contents for a multi-sheet drawing.
What is a Sheet Index?
This practice is to capture specific sequential tasks in the detail necessary for end-user personnel to perform their work safely. It is typically written to document allowable methods to achieve the required results.
What is Standard Work?
This production part offers a safe and reliable means to control the position of the aircraft to attain commanded pitch position during take-off, cruise, and landing.
What is HSTA? (Horizontal Stabilizer Trim Actuator)
In 1929, William Boeing of Boeing and Frederick Rentschler of Pratt & Whitney teamed up and created this airline company to manage its airline subsidiaries.
What is United Airlines?