The model of Toyota Reach Truck that is available in 2 different voltages.
What is 8BRU18? 24V & 36V, the others are 36V only.
100
A wearable component on the 7HBW23 Toyota Walkie Pallet Jack that can be turned 8 times before it needs to be replaced.
What are Polyurethane Stability Wear Pads?
100
The year that Toyota started using the 4Y engine in Toyota Lift Trucks.
What is 1986?
100
The 7 Series Toyota Lift Trucks in the 60/70/80 models come standard with dual drive tires. They do not include this feature as the dual drive tires make these trucks just as, if not more stable, than trucks with single drive tires w/ this feature.
What is the Swing Lock Cylinder?
200
The model number of a 3000 pound capacity Toyota electric pneumatic lift truck that is not made in the U.S.
What is a 7FBH15?
200
The 3 different Conditioning Packages available on the 8 Series Toyota Reach Truck.
What are Corrosion, Cold Storage & Freezer.
200
The cost saving maneuverability of the 7HBW23 Toyota Walkie Pallet Jack that helps customers ship more pallets on each truck and load 1 additional truck every 3 days.
What is Pin Wheeling?
200
The year that Toyota introduced the System of Active Stability.
What is 1999?
200
What year did Toyota first build the FD model truck?
What is 1967?
300
The measurment of 40.4" on a 7FBEU Toyota 3 Wheel sit down lift truck.
What is the standard head clearance?
300
The Toyota Order Picker model that has an available mast height of 315"
What is 6BPU15? The 7 series only goes up to 240".
300
What standard compound the 12" drive tire on an 8 Series Toyota Electric Pallet Jack is made of.
What is rubber?
300
Manufactured in Crothersville Indiana by a Toyota company, this part of the 8 Series I.C. Toyota Lift Truck has less parts, less totating mass and greater durability and is enginereed with 3 shafts.
What is the transmission?
300
The "A" & "K" in the 7 Series model Toyota Lift Trucks- 7FGAU50 & 7FGKU40 represent this.
What is a larger, heavier counterweight?
400
The Yaw Rate Sensor
The Load Sensor
The Speed Sensor
The Height Switch
What are the 4 Lateral Stability SAS Sensors?
400
The Toyota Order Picker model that gomes standard w/ flip up side gates.
What is 6BPU15? The 7 Series comes standard w/ fixed side gates w/ flip up as an option.
400
This is mounted on the trailing axel of the Toyota 8TB50 with shock absorbing blocks designed to eliminate the transfer of vibration through the truck and onto the operator.
What is Trail Axle Suspension?
400
The little tabs welded on where the overhead guard meets the canopy.
What are Curtain Tabs?
400
This design prevents the 7 Series Toyota Pneumatic Lift from being started in 2nd gear, reducing the risk of clutch failure.
What is Automatic 2- Stator Torque Converter Transmission?
500
The type of Toyota Lift Truck that the Swing Lock Cylinder is horizontally mounted.
What is electric? I.C trucks are verically mounted.
500
The Toyota Order Picker Model that comes standard w/ electric brakes.
What is 7BPUE15? The 6 Series have shoe & drum.
500
Seperatley Excited Motor and Contoller which utilize CAN-bus technology is commonly referred to as this.
What are the 4 Longitudinal Stability SAS Sensors?
500
This sytem uses a single hydraulic reservoir and engine-driven pump to generate hydraulic pressure for lifting, tiliting,steering and braking, which ultimately increases reliability and simplifies servicing.
What is Toyota's Centralized Hydraulic Power- Assist System (CHPS)?