On the job briefing
By the numbers
RWP
Safety Rules
MW1000 School
100

What was the nearest medical facility listed in tonight's job briefing?

Lancaster General

100

How much does 3' of 136 pound rail weigh?

136lbs

100
Watchmen must be relieved, rotated, or provided a 15-minute break every how many hours?

2-4 hours (329.c.3)

100

What color must a derail be painted across the top of the derailing surface?

Yellow (SR 4.15 amended)

100

What is standard gage?

56 1/2"

200

What is the track speed on North Side Industrial Track?

10mph

200

How long is a standard wooden crosstie?

8'6"

200

Name one of the two exceptions for when a watchmen can be positioned in the fouling envelope of a live track. 

(1) During walking inspections, or (2) with written permission from the division engineer or director of production.

200

All stopped, standing, or parked vehicles of any type must be at least this far away from the field side of the running rail of any track.

Four feet (7.3)

200

What is the maximum profile deviation allowed in Class 1 track?

3"

300

What is this week's engineering safety focus?

Slips, trips, and falls.

300

How much does a gas powered profile grinder weigh?

130lbs

300

When leaving track cars and other MW on-track equipment unattended, derails should not be less than how far from the end or ends of equipment?

50' (342.b.5)

amended to:


300

The distance you must stay clear of the ends of standing equipment, unless performing maintenance or repair of equipment while under applicable protection (e.g. Blue Signal, RWP, or Three Point Protection).

25' (SR 3.2)

300

What is the maximum number of consecutive ties I can surface and still only be "spot surfacing"?

10

400

The sight distance for 30mph, and 5 seconds to reach the pre-determined place of safety.

880'

400

How many FRA reportable injuries does the MAD have to date?

30

400

The distance two or more pieces of equipment that are working together must maintain between each other unless instructed by the employee in charge. 

40'

400

How far is your fingernail allowed to exceed in length beyond the tip of your finger?

1/4" (5.13)

400

If I perform out of face surfacing with a dynamic track stabilizer, what speed restriction is required if temperatures are going to exceed 60 degrees tomorrow?

80p/50f