Hand Hygiene
Hand hygiene should occur for this amount of time.
What is 30 seconds?
This is done between each step during Level 3 garbing.
What is spraying gloved hands with sIPA?
This type of packaging is not allowed within the CNC or ISO-classified spaces.
What is corrugated cardboard?
This is the PPE required for cleaning in the CNC.
What is non-sterile mask, non-sterile gloves, and safety glasses?
These are the types of movements personnel should exhibit in the cleanroom.
What is slow and deliberate?
This should be done under running water.
What is picking nails?
This is the first step of Level 2 garbing.
What is donning a non-sterile frock?
What is the indicator light?
This is the cleaning agent used for daily cleaning.
What is CyQuanol?
What is first air?
When performing hand hygiene, personnel should wash this far up their arms.
What is to the base of the elastic cuff?
Upon entering PAL-In Wet, this is required for Level 2 garbing, but not Level 3.
What is a non-sterile mask?
Personnel must do this before transferring an item using a passthrough.
What is clean the surface of the passthrough with sIPA?
This is where cleaning is documented.
What is C360?
This must be done before and after each batch.
What is disinfect work surfaces with sIPA?
This is used primarily on bare skin.
What is ABHR?
This PPE comes after donning non-sterile gloves when performing Level 2 garbing.
What is safety glasses?
This is how double-wrapped items are transferred into the ISO 5 PEC.
What is outer packaging opened at the edge of the PEC, inner, sterile packaging pulled inside?
This is the procedure for triple cleaning.
What is CyQuanol, CyQuanol, Peridox, sIPA (on stainless steel + windows)?
This is how many batches may be present at the PEC at once.
What is one?
Towels used to dry hands should be this.
What is low-lint, disposable?
This is the order for Level 3 garbing.
What is first set of sterile gloves, sterile mask, sterile hood, sterile coveralls, sterile boots, sterile goggles, and second set of sterile gloves?
This is the unidirectional transfer sequence (with cleaning agents).
What is: uncontrolled → CNC (Peridox); CNC → ISO 8, Kitting (Peridox); ISO 8, Kitting → ISO 8, W/M (sIPA); ISO 8, W/M → ISO 7 (sIPA); ISO 7 → ISO 5 (sIPA)?
This is the PPE required for cleaning inside the ISO-classified spaces.
What is a PAPR?
This is the procedure for picking items up off the floor in ISO 7 and 8 spaces.
What is pick up the item then immediately exit the room (ISO 7), and finish current batch then pick up the item before changing your gloves (ISO 8)?