Show:
Bearing and Seal
TMC
This and That
Discs (maybe)
Misc.
100
are the 4 parts of a tappered roller bearing
What is cup, cone, cage and rollers
100
is the first step in the TMC method
What is lub the bearing with same lub as the axle sump
100
is the first step in mulipling your foot force
What is the brake pedal
100
is the rotating member of the brakes that is the heat sink in a disc type brake system
What is the disc brake rotor
100
is the 2 step method used to seal brake lines that are steel
What is double flare
200
are the 2 types of lub used for wheel hubs
What is grease and oil
200
acronym for TMC
What is Technical and Maintenance Council
200
is the force output of a 1" wheel cylinder when 50' lbs on a 6" lever and a 3" master cylinder is applied
What is 225 ft. lbs.
200
are the 2 parts needed to over-haul the disc brake caliper
What is the dust boot and square-cut seal
200
is the max runout for a disc brake rotor to be reused with out turning
What is .015 inch
300
a static seal made to fit the hub bore and the axle spindle
What is a unitized seal
300
allowable runout for spoke type tire and wheel
What is 1/8 inch
300
is the master cylinder bore that can't be honed or renewed
What is aluminum bore master cylinder
300
when the center of the brake drum is worn more then either side
What is a concave drum
300
is used to force air out of brake lines while master is under pressure
What is pressure bleeding
400
type of drum used on spoke style hubs and wheels
What is a inboard drum
400
is the torque spec for ConMet PreSet hubs
What is 300 ft. lbs.
400
is the action of 1 shoe is governed by an input from the other shoe ( self-energizing )
What is Servo-type brakes
400
what receives the hyd. force of the brake fluid in a disc brake system
What are the caliper pistons
400
is the 2nd tpye of flare used in brake lines
What is ISO flare
500
has a precision-dimensioned spacer between the tapered roller bearings
What is a ConMet PreSet hub
500
the hub, brake spider, and the steering knuckle are all integrated in a single assy.
What is Meritor Easy Steer Plus assy.
500
when air psi is sent to the booster assy. when depressing the foot pedal
What is air-over-hyd.
500
are the parts that pull the shoes back from the drum when the psi. is released
What are the return springs
500
is what helps fluid in the master cylinder return back to the reservoir after brake application
What is the compensating port