This negative electrode contains the filament and focusing cup.
What is the cathode?
This process occurs when heating the filament releases electrons.
What is thermionic emission?
This device converts AC current into DC current before it reaches the x-ray tube.
What is a rectifier?
This material is most commonly used for x-ray tube targets because of its high melting point
What is tungsten?
This occurs when an x-ray photon passes through the patient without interacting and helps form the image
What is transmission?
This chamber surrounds the filament on three sides and helps focus electrons toward the anode.
What is the focusing cup?
This type of radiation produces 85-100% of the useful x-ray beam.
What is Bremsstrahlung radiation?
This transformer is the first component to receive power in the x-ray circuit
What is the autotransformer?
This exposure factor primarily controls beam quality
What is kVp?
This measurement describes the thickness of material required to reduce beam intensity by one-half
What is the Half-Value Layer (HVL)?
This principle uses a large actual focal spot and a small effective focal spot to improve image sharpness while managing heat.
What is the Line Focus Principle?
This interaction occurs when a projectile electron ejects a K-shell electron from a target atom.
What is Characteristic Radiation?
This circuit contains the rheostat and controls filament heating.
What is the filament circuit?
Adding this increases beam quality while decreasing beam quantity.
What is filtration?
This contrast agent has the greatest probability of experiencing photoelectric interactions because it has the highest atomic number listed in our PowerPoint.
What is Barium?
This phenomenon occurs when too many electrons crowd around the cathode and limit additional electron release.
What is the space charge effect?
Bremsstrahlung in German translates to this
What is Braking?
In a step-up transformer, this side contains more windings.
What is the secondary (output) side?
This common tube failure is caused by vaporized tungsten coating the glass envelope and creating an electrical short.
What is tube arcing?
During this interaction, the x-ray photon is partially absorbed and continues in a new direction as a scatter photon
What is Compton scatter?
These two factors determine the heat-storage capacity of a rotating anode.
What are disk diameter and rotational speed?
This is equal to the difference in binding energy between two electron shells involved in a characteristic interaction
What is the energy of the characteristic x-ray photon?
This measurement describes the variation between the maximum and minimum voltage of a waveform
What is voltage ripple?
This effect causes the cathode side of the beam to be more intense than the anode side
What is the anode heel effect?
This minimum photon energy is required before pair production can occur.
What is 1.02 MeV?