Safety
Safety equipment that is to be worn to protect a person from potential dangers.
PPE, or Personal Protective Equipment
The X axis moves ______ and _______.
Left and Right
What is the G1
Linear movement of an axis
If the scale on an engineering drawing is 1:2, is the drawing larger or smaller than the actual project?
Smaller
RPM Stands For
Revolutions Per Minute
A form containing detailed documentation about a hazardous material.
What is MSDS, Material Safety Data Sheet, SDS, or Safety Data Sheet
When adjusting the gear range from high to low on a general head vertical mill, it is important to not have the ______ running, or it can cause hard to fix damage.
Motor, or Spindle
Circular Interpolation Clockwise.
What is G2
What are the four views of the part on the blueprint?
Front, Top, Right side, and Isometric(ISO)
SFM, Stands For
Surface Feet Per Minute
A federal government agency that sets and enforces regulations for workplace safety.
What is OSHA or the Occupational Safety and Health Administration
If the quill is locked, which part of the mill can be moved to adjust the Z axis?
Table, or Knee
Tool offsets must always be set for this axis?
What is Z Axis
What type of line is thin and broken into a series of short dashes?
Hidden line - representing a line on the other side of the piece not visible.
IPR Stands For
Inches Per Revolution
What type of clothing should not be worn when working with a Mill or Lathe
Loose Fitting Clothing
Describe the direction of movement provided by the saddle.
Toward and away from the column along the Y-axis.
When running program for the first time you should always run in this mode for each tool change?
What is Single Block
What includes information on the piece like name, part number, tolerances, scale, and material the part is made out of.
Title Block
D.O.C. Stands for
Depth of Cut
Who is responsible for creating a Safe work environment?
Who is Everyone
What tool is best used for machining a wide variety of features such as pockets, slots and steps.
End Mill
G54 is an example of a type of ________________?
Work Offset, WCS, Work Coordinate System
Locates a hole or indicates symmetry
Center Line
Dia. Stands for
Diameter