DJI Mavic 3E
These two positions with the left and right joy sticks will startup the motors on a DJI drone or will perform an emergency shut off.
What is 'Down & In' or 'Down & Out'
This application is used to capture as-built points using the Emlid Reach RX.
What is Emlid Flow?
This function in the DroneDeploy Ground app will capture multiple Panos during a walk.
What are Walkthroughs?
The range on the Leica RTC360 Scanner.
What is 50-75 FT?
This is the main function for using a Leica iCON GPS 70.
What is for Surveying?
This flight mode will disable all intelligent flight features on the drone.
What is "Attitude" mode.
A protocol that streams data coming from a Global Navigation Satellite System (GNSS) over the internet.
What is NTRIP?
Turing on this device and then attach it to either a selfie stick, or a hard hat mount will allow users to capture 360 data.
What is a 360 camera?
This Leica product allows you to connect to the scanner in the field using an iPad.
What is Cyclone Field 360?
This feature allows the iCON gps to not have to be 100% vertical to snap a point.
What is the tilt feature?
GPS data coming from this source is being corrected with Real-Time Kinematic (RTK).
What are Satellites?
This application uses both photogrammetry and LiDAR technology to produce 3D scans using an iPhone pro.
What is Pix4D Catch?
This action will finish a walkthrough and sync the data.
What is hitting the record button?
This is the means in which the Leica RTC360 scanner collects 3D point data.
What are Lasers?
Once the GNSS is connected to this device you will be able to collect accurate coordinates.
What is the Base Station?
This operation uses the internet and RTK data to improve the accuracy of GPS data.
What is NTRIP?
This is the level of accuracy the Pix4D Catch paired with the Emlid Reach RX can deliver.
What is 'Centimeter' level accuracy?
Selecting this option on the DroneDeploy Ground app allows you to start capturing new data.
What is "Capture Media"?
This is the most important device needed to operate the RTC360 Scanner.
What is the USB Stick?
This device connects to the GNSS and allows you to measure points and see data in real time.
What is the CC200 Tablet?
Is the main function of using Checkpoints when mapping a site with a drone.
What is 'Measure' accuracy?
This online platform processes the data taken from Pix4D Catch to create orthomosaics, point clouds, and 3D models.
What is Pix4D Cloud?
This action is required to connect your Insta360 camera to the DroneDeploy Ground app.
What is selecting 'Connect Camera' in the app?
This is the data that is produced by the RTC360 scanner.
What is a Point Cloud?
This step is critical at the beginning to make sure your elevations are recorded accurately.
What is set the pole height (6ft)?