V90+
How many nests/trays are needed for first fill?
2
How many tubs are needed for first fill?
10
On which cleaning is stainless steel cleaner used?
Bi-Weekly
After entering in the robot cell, the three steps to get the robot back going after closing the doors are _________, ____________ and then Cycle Start
Fault Reset, Full Initialize
What does CNC stand for?
Controlled non classified
You can inspect for _______ minutes before needing to take a _______ minute break
You can inspect for 30 minutes before needing to take a 20-minute break.
What are the three things that need to be wrote on the top of the tub when collecting beginning and end Qpop tubs.
Tub number, Operator who collected tubs name, and date.
What is the Lilly expiration date for quat?
28 days
Which position of the Stn 100/200 do pallets sit in when the robot arm removes/places tubs in the pallet.
Position 2
What does TOR stand for?
Time out of Refrigeration
How many Qpop tubs are collected for each FO?
8
Which camera stations do we preform camera challenges on?
Camera station 1 and 3
What are the two cleaning agents that can be used when wet mopping the floors during Weekly/Bi-Weekly cleanings.
Bleach and Quat
What is the name of the part of the robot that we feed lids into.
Lid Singulator
What does APS stand for?
Aseptic process simulation
How many syringes are in the inspection zone when inspecting on the V90?
10
On the HMI you have a Start, Stop, Complete Mode, and __________ buttons.
Stop Infeed
The two incubation rooms and the functional testing room require Daily, Weekly, and ________ cleanings?
Monthly
After hitting Generate batch end time what you hit _______ data set, _______ values, and then ________ data.
load, read, save
What does ALCOA stand for?
Attributable, Legible, Contemporaneous, Original, Accurate.
When running in batch you need to collect _______ beginning qpop tubs, ________ middle qpop tubs, and ________ end qpop tubs per FO.
1, 6 , 1
On the Functional challenge kit, what defect is the green tip syringe?
Missing plunger
What are the two possibilities for causing a deviation when missing a Bi-Weekly cleaning?
Consecutive misses or 2 in two months.
If the AVG is unable to place a pallet on the robot after 5 minutes where will it place the pallet.
The hospital location
What does CCL stand for?
Control Chart Limits