Commands
Vocab
*evil laugh*
Step by Step
Subnet ID
miscelLANeous
100

This symbol is used in the beginning of command lines when configuring basic passwords.

What is an exclamation point?

100

Duplicate Address Detection

DAD

100

Application, Transport, Network, Data Link, Physical

What are the five steps of data encapsulation?

100

This Class is a unicast medium size network.

What is Class B?

100

10 Mbps, 100 Mbps, 1000 Mbps, 10 Gbps


*examples of*

What are examples of Ethernet LANS?

200

Math uses both source and destination MAC when entering this configuration keyword.

Hint:

*three weird words that aren't words*

What is src-dst-mac?

200

The dividing line between the prefix and the host part.


*phantom of the opera*

What is subnet mask?

200

Add the channel-group number mode on command in interface configuration mode under each physical interface that should be in the channel to add it to the channel is the first step of configuring this manually?

*not hi-potion, but*

What is EtherChannel?

200

The value must not interleave 1s and 0s is a rule this must follow.


*bender*

What is binary subnet mask rule?

200

This is the relationship term for the neighbor state "full".


*gotta let Facebook know; not adjacent though*

What is adjacency?

300

All MAC table entries of all types are shown using this command.

Hint:

*show*

What is show mac address-table?

300

The blocking state, the interface does not forward frames; the switch removes old stale (unused) MAC table entries for which no frames are received from each MAC address during this period.


*not learning*

What is listening?

300

Determining the class (A, B, or C) based on the first octet is the first step in this process.


What is finding the first and last usable IP addresses in the network?

300

You can use a decimal shortcut similar to the one used to find the subnet ID to find this.

*not subnet mask, but it is subnet something something*

What is subnet broadcast address?

300

Routing Information Protocol


*just killed the club*

What is RIP?

400

This command gathers information by generating packets that trigger error messages from routers.

Hint:

*not ping*

What is traceroute?

400

An IEEE standard mechanism (802.3u) with which two nodes can exchange messages for the purpose of choosing to use the same Ethernet standards on both ends of the link, ensuring that the link functions and functions well

*also not technically a word*

What is autonegotiation?

400

Preparing to forward frames by learning MAC addresses by examining the source MAC address of each frame received by the switch is a step in this process.

*after LAN switches receive Ethernet frames*

What is forwarding the frame or ignoring the frame?

400

This is the subnet ID for the IP address 172.22.55.77 with a mask of 255.255.254.0


*quick maths*

What is 172.33.54.0?

400

802.11n and 802.11ax


*bill of radio rights*

What are the two amendments that both 2.4-GHz and 5-GHz use?
500

When Hello and dead times must match this command is the best show/debug command which is a OSPF neighbor requirement.

*part 6/7 config checklist*

What is show ip ospf interface?

500

The definition of half-duplex.

What is how two adjacent layers on one computer work together with the lower layer providing services to the higher layer?

500

The first step in physically installing a router.

What is connect the RJ-45 connector of on the router of one of the LAN switch ports?

500

This is the subnet ID for the IP address of 192.168.6.54.


*quicker maths*

What is 192.168.6.52?

500

RF Management, Association and Roaming Management, Client Authentication

What are WLC management functions for a lightweight access point?