Electrical Safety/Bloodborne Pathogens
Universal Precautions
What are precautions to take when dealing with blood and other body fluids such as wearing PPE?
_______ have to hold 5,000lbs. for fall arrest applications.
What is anchors?
2nd step from top
What is the highest safe standing height on a ladder?
Used to control energy sources
What is lock out device?
At the start of the shift
What is when the pre-op inspection for a forklift should be done?
Health Care Professionals
What is group of workers at most risk of being exposed to bloodborne pathogens?
Before each use.
What is how often fall protection equipment needs to be inspected?
4:1
What is the proper ratio for setting up an extension ladder?
_______ is allowed to lockout and tagout equipment
What is an authorized employee?
3 truck lengths
What is how far behind to keep when following another forklift?
Not allowed to reset equipment/panels with exposed electrical parts
What is Non-Qualifed Workers?
15 minutes max
What is the maximum time a fallen worker should be suspended?
3
What is how many points of contact you should maintain when working on a ladder?
Only _____ are allowed to put your lock on and remove it.
What is you?
Not allowed with compressed air
What is blowing/cleaning yourself off?
Follows the path of least resistance
What is electricity?
Flame over circle
What is the pictogram that represents oxidizers?
Both hands
What is needed to hold the handhold while riding the manlift?
When performing a group lock out the key to each lock on the energy isolating device must be placed in _____
What is a group lock box?
Leg muscles
What is muscles that should be used when doing proper lifting?
Tagged and not used until properly repaired
What is defective equipment?
Sections 4, 5 and 6
What is where to look on SDS for information about first aid, fire fighting measures and accident response (emergencies)?
Pull the rope in direction of travel
What is how to stop the manlift?
Verify/ challenge the equipment cannot be started
What is the last thing to do before starting to work on equipment?
PASS
What is how to use a fire extinguisher?
P- Pull the pin
A- Aim the nozzle low at the base of the fire
S- Squeeze the handle to discharge the agent
S- Sweep the nozzle side to side