MOLD
FIRE/SMOKE
WATER
Equipment
Calculations
100

What is the primary piece of equipment used to create negative pressure inside containment?

Air scrubber / negative air fan 

100

This filter is commonly used in a negative air machine to assist with odor removal.

Charcoal Filter 

100

These are the 4 main Principals in restorative drying

Assessment, Documentation, Controlled Drying, and Selective Replacement

100

This Machine is used to create airflow 

WHAT IS AN AIRMOVER? 

100

Length x Width x height = 

What is cubic footage 

200

This is placed to separate an affected area from a non-affected area to prevent cross contamination during the work

Containment / engineering controls

200

THIS MACHINE works splitting the normal oxygen molecules in the air into single atoms. These atoms then attach to other O2 molecules in the air to form (O3).  Ultimately removing smoke odors from many types of materials.

WHAT IS AN OZONE MACHINE?

200

These are the 4 knows of drying

1. What is Wet?

2. How wet is it?

3. Is it Drying? 

4. Is it Done ? 

200

 THIS MACHINE DRAWS MOISTURE OUT OF THE AIR.

WHAT IS A DEHUMIDIFIER?

200

Base board and trim and measured like this 

What is Linear Feet

300

What are the 3 type of engineering controls/containments?

Source, Localized, and Full

300

THIS IS THE NAME OF THE SOLUTION USED TO WASH THE WALLS AT A FIRE/SMOKE JOB.

Wall Wash 

300

This is The Main goal of any drying chamber  / equipment setup scenario on any water loss

Increase the Rate Of Evaporation

300

The main benefit of using This is that they are safe to use in occupied areas for deodorization purposes.

Hydroxyl

300

A dehu that removes 110 pints per day is classified as what size dehu 

What is an Xtra large Dehu 

400

 a device used to measure pressures. Typically for our industry it measures and monitors the negative pressure of containment

Manometer

400

These are natural rubber sponges designed to remove soot from fires in a dry state. The tiny porous cells of the sponge lift soot from surfaces quickly without smearing.

Chem Sponge

400

These Three Factors That Have A Direct Impact on the Rate Evaporation when drying a structure.

Airflow , Temperature, and Humidity  or  H.A.T. , Commonly referred to as the drying pie

400

THESE ARE ALL THE PPE ARTICLES REQUIRED TO ENTER A MOLD CONTAINMENT. 

WHAT ARE HAZMAT SUIT, RESPIRATOR, GLOVES, GLASSES?

400

Ideal RH for drying environment

what is between 40-60% RH 

500

This type of air filter can theoretically remove at least 99.97% of dust, pollen, mold, bacteria, and any airborne particles with a size of 0.3 microns

H.E.P.A. Filter / high efficiency particulate air filter

500

THIS IS THE ONE MATERIAL THAT CANNOT BE PLACED IN THE OZONE CHAMBER BECAUSE IT WILL BE DESTROYED.

Natural Rubber

500

The Weight Measurement Used to Measure Water Vapor in The Air 

Grains Per Pound

500

What is the benefit of Weighted Extraction wands ?   

Deeper extraction and more water removal

500

ACH calculations are figured by 

Cfm (x) air exchanges per hour (\) 60