Watlow trivia
Watlow heaters
Watlow sensors
Watlow controllers
Thermal systems
100

Where are all of the utilities in the St. Louis ATC located? 

under the floor! (18in of space below the floor)

100

What type of material are Firerod heaters insulated with?

MgO (magnesium oxide)

100

This type of sensor is in a glass bead and are commonly used in the automotive industry 

thermistors

100

Which controller in Watlow's portfolio does not have any sort of remote user interface (RUI)?

RM family 

100

What kind of control loop can we use if we need to heat a load that is either very large or the heat source is far from the process sensor? 

cascade control loop 

200

How many megawatts does the St. Louis ATC lab have available? 

1.3 MW

200

What are the heating element of the vast majority of Watlow's heaters made of? (the physical resistor)

NiCr (nichrome)

200

If you turn on your heater, and your controller starts reading a decreasing temp, what might you have done? How could you have prevented this? 

crossed your wires, use a magnet to find the negative leg!

200

What type of mechanical relay is necessary for a safety limit? 

Form A

200

What are the 3 modes of heat transfer? 

conduction, convection, radiation 

300

Who's "basement lab" do we have in our lab? 

George Desloge 

300

What type of heater class are the FLUENT and Ultramic heaters? 

layered heaters 

300

Which thermocouple junction style has the quickest response time? 

exposed 

300

The Watlow ASPYRE power control can switch up to how many amps?

800A (so far!)

300

What is an example of a non-thermal sensor that the F4T can control?

Pressure, flow, humidity 

400

What is the machine called that compacts a cartridge heater that Watlow patented back in the day?

Swager 

400

Who on the Global Technical Team for distribution has the expertise to design ASME-rated circulation heaters? 

Vicente 

400
What device should you sell your customer when you need to send a thermocouple signal over a distance of 600ft? 

a transmitter 

400

I have a customer who wants a rugged, touch-safe SCR that can fire a heater with phase angle firing. They have price constrictions on this project. Which Watlow product should I direct them towards? 

DIN-A-MITE C

400

What type of fusing is necessary if you want to protect your wiring and your SCR(s)?

DFJ

500

Watlow patented the Firerod cartridge heater in which year? 

1954

500

Which type of Watlow duct heater has modular element blocks that can be replaced in the field? 

MDH series 

500

You have a customer who requires very accurate temperature sensing and control in a medical application. Which Watlow sensor do you direct them towards?

an RTD

500

What are the communication protocols available on the RM system? 

Profibus DP, Ethernet I/P, Devicenet, Modbus TCP, Modbus RTU

500

What mode of failure does a DFJ fuse exhibit?

I^2T