MIG WELD
ARC WELD
GAS WELD
SAFETY
TOOLS
WHAT TO DO..
100
The amount of stick out for MIG welding is ____to ____
What is 3/8" to 1/2"
100
The letter E on an stamped on an electrode is ______
What is E for electrode
100
The green hose carries ________ gas
What is oxygen gas
100
The lens shade for plasma cutting
What is lens shade #5
100
What is MIG Pliers
100
SHARE TWO EFFECTIVE COPING SKILLS
200
The predominant shielding gas we use while MIG welding is___________
What is Argon Gas
200
The height one holds the electrode above the metal when arc welding
What is 1/8 of an inch
200
Red hose carries __________ gas
What is acetylene gas
200
Lens shade for Arc / MIg welding
What is lens shade #10 - #12
200
What is an angle grinder
200
WHAT ARE TWO BAD COPING SKILLS YOU STILL DO..
300
Tiny pin holes in a weld is called_______
What is porosity
300
The number 60 on 6018 electrode is
What is 60,000 lbs. of tensile strength in order to pull the weld apart
300
What is an Acetylene Regulator
300
Before welding you must first ________ the__________ _______ across
What is first pull the welding screen across
300
What is a chipping hammer
300
WHAT DO YOU DISLIKE ABOUT WELDING
400
Another name for a fillet weld is a _________ weld
What is a T weld
400
The most common angles ____ to ____ one holds the electrode at when arc welding
What is 15 to 45 degrees
400
What is a striker / fire starter
400
If you have to reposition or move hot metal one must use _____ _________
What is use MIG pliers, pliers or vise grips
400
What is an auto darkening helmet.
400
WHO WAS THE LAST PERSON YOU SPOKE TO AT YOUR OFFICE? HOW DID IT GO?
500
Always _______ _______ your tack welds
What is weld over your tack welds
500
Working pressure is pressure found at the ______ tip
What is torch tip
500
Acetylene tanks are _____ in color
What is red in color
500
You should have have proper _________ when welding in a confined area.
What is proper ventilation
500
A chipping hammer is used to remove ________
What is slag
500
WHAT IS A SAYING OR RULE OF THUMB THAT YOU LIKE TO CONSIDER WHEN WELDING?
WHAT IS A GOOD SAYING THAT ALSO APPLIES TO LIFE OUTSIDE THE WELD MASK?
600
The type of transfer we use in the shop is________
What is short circuit transfer
600
The number one found on 6013 electrode refers to
What is weld position one
600
What is a dry flux compound
600
What is an auto-darkening helmet.
600
What are welding gloves
600
What would you change about your sleep schedule?
700
Shielding gasses are used to prevent ______ from contaminating the weld
What is oxygen
700
Arc welding electrodes overtime can be damaged by _________ moisture
What is excessive moisture
700
Acetylene gas is unstable after _______ psi
What is 15 psi
700
One should never stand in front of a ________ ______ when opening the main valve to oxygen
What is an adjusting screw
700
The function of a needle scaler is to remove________
What is slag
700
what is something you made that you are most proud of?
800
What is porosity
800
When chipping slag off metal...You must wear....
What is safety glasses/ Welding helmet set on grinding.
800
An oxygen valve is a _____ ________ valve
What is a double seated valve.
800
Acetylene is unstable after _____ psi
What is 15 psi
800
What is a needle scaler
800
goals in life:
* eat more
* ________?
*________?
900
You cannot MIG weld effectively if you are ______ with a strong _______
What is outside and with a strong breeze
900
______ - ________ light is generated when arc welding.
What is ultra - violet light is generated when arc welding
900
Oxygen tanks are _______ in color
What is green in color
900
If you have spilt water or other liquids in the welding area. One must ______________________
What is clean up liquids before welding
900
What is soap stone
900
intrusive thoughts?
1000
A copper coating is added to the electrode wire in order to _______ ________.
What is prevent rusting or oxidation
1000
The glass like material left after welding on the surface of a weld bead. It must be completely removed before welding over the bead.
What is slag
1000
Oxy-Acetylene welding can reach temperatures up to ________ degrees Fahrenheit
What is 6,000 degrees Fahrenheit
1000
Never move ______ ______ with welding gloves
What is move hot metal
1000
A tank full of water in order to quickly cool metal
What is a dip tank
1000
let's return to the miracle day..