Alarms
What is "extreme limit?"
This adaptive-like feature is commonly associated with "air cutting"
What is "approach override?"
This tool is used to view the difference in signal value and time between two selected points on the recording.
What is "Delta tool?"
This TMAC command occurs at the beginning of the part program and ensures that the TMAC loads the correct tools and sections for that part program
What is "Job Load?"
What is "enable learn" mode?
This alarm value % is calculated below the learned HP parameter
What is "undercut?"
This is the max feedrate % that can be set
What is "255%?"
This tab provides additional data about the recording, and placing the cursor displays additional data (dependent on the mode selected)
What is "Details Tab?"
This TMAC command is inserted at the desired end of the tool cut, commonly when the tool disengages from the material
What is "TMAC Stop Command?"
This feature turns off all monitoring for the selected TMAC Instance. When this setting is active, the system does not perform any monitoring functions.
What is "monitor disable?"
What is "HP*sec?"
When adaptive is enabled, learned HP is replaced by this slightly lowered value
What is "Target HP?"
This tool can find maximum and minumum HP signal values based on search parameters
What is "Find Peak" tool?
This TMAC command is inserted near the beginning of each tool cut, right before the tool engages in cutting.
What is "TMAC Start Command?"
This tab under system contains the following information: Software information, machine information, license, display options, and time settings.
What is "general tab?"
To ignore undercut limits, TMAC must have this setting enabled
What is "Part re-cut?"
Decreasing this setting causes the feedrate to adjust more slowly when contacting the material
What is "adaptive headwall?"
Navigating to the "more" tab and selecting this option allows you to download recording files (.tmd) for viewing on the "Offline Data Viewer" application
What is "Export Recordings?"
To ensure macro-interrupt is enabled, this type of program needs to be included in one of the TMAC commands in the part program (control dependent syntax)
What is "interrupt program?"
This horizontally dotted line represents the HP required to spin a spindle without engaging in a cutting operation
What is "idle?"
When adaptive is enabled, this limit is no longer available, and you can now set "Feedrate Extreme" and "Feedrate Wear" limits
What is "wear limit?"
This defines an area around the target value that the signal value is allowed to deviate from before TMAC makes an adjustment to the feedrate.
What is "Target Window?"
This tab shows instances that occur throughout the recording, including start monitors, stop monitors, alarms, and custom "instances".
This is the default TMAC sub program (control/instance dependent)
What is "O9018?"
During data purge operations, marking this check box allows TMAC to rewrite the database and free some of the space allocated in the database (TMAC can not be used during with this check box enabled)
What is "reclaim space?"