Shop Safety
Name all the PPE that is needed to work in the woodshop.
Closed toe shoes, eye protection, hair tied up, sleeves rolled up, dangly stuff tucked in, no jewelry (rings, watches, bracelets, necklaces)
minimum stock length during breakout
12 inches
measurement we set the stop at on the chop saw after breakout.
5 inches
The longest river in the world
The Nile River
Powells favorite machine in the shop
the lathe
The person who turns the machine on and off
The operator
minimum stock thickness you can put through the planer
1/4"
what must a working drawing include (orthographic)
front, side and top views
First animal to be clones was?
A sheep
what do I like to do on my spare time
Bike, hike, freedive
Hold the handle and keep the sharp end pointed at the ground and away from people.
3 Hazards to look for when choosing stock to breakout
Knots, checks, nails/staples
shaker plug recess depth and width
1"x1/4"
The print that a flying squirrel makes on the ground when it lands.
what is a stizmark
What destination did I say I would go to if I had unlimited money and time
New Zealand
What 3 things should always be reported to the teacher
injuries, accidents, defective equipment,
list the procedure for getting the planer set up to cut your stock
measure thickest part of stock
set planer height to match the measurement
turn the handle clockwise half a turn down from your measurement so the wood will actually be cut
turn the machine on
Broken out stock of our napkin holder that we were aiming for, unsuccessfully...
21" x 6.5" x 3/4"
Nearly all fossils are preserved in what type of rock?
Sedimentary
The name of the song that I sang partially for you yesterday during attendance question
a muppet or a man
Point out all of the emergency power shutoff buttons, fire extinguishers, flammables storage and oily rag bins.
power shutoff buttons
(by the front door, by the backdoor)
fire extinguishers
(by the front door, by the backdoor)
flammables storage
(in the finishing room)
Oily rag bin
In the finishing room
how to position cupped and curved stock on the chop saw
cupped wood should have the cupped side or happy face side pointing up so the blade won't get pinched
wood that is curved should be placed so that the outside of the arc is touching the fence to prevent pinching
name the 4 types of lathe tools that we talked about
skew chisel, gouge, parting tool, scraper
Whitch influential classic metal musician died last year
Ozzy Osbourne
where did I go to high school
Centennial