2 1/2 +2 1/2
5
Why should you need to keep your workplace clean
to prevent accidents
What machine do you use when cutting at a 0-degree angle?
milter saw
faster working
How much wood can wood a woodchuck chuck if a wood chuck could chuck enough wood
at least 1
What degree measurement is a milter cut.
45 degree
why is it important to were safety glasses.
To not get debris in your eyes
How many extinguishers do we have?
4
What do you use to mearsure.
tape measure
If a tree falls on the floor, did it really fall
yes it did fall.
If wood boards cost $5.50 each board and you need 13 boards what is the total cost.
$71.5
What should you do when you get injured in the shop
Tell teacher and get first aid.
What do you do when your machine has an electrical malfuction.
Unplugged tell teacher
What do you use to guide the wood in the table saw
push stick
What song came out October 7, 2013, by pitbull and Kesha
Timber
34 3/4÷ 2
17 3/8
Why is it important to have a good ventillation.
So, they don't breathe sawdust
What should you do if a machine doesn't want to start
unplugged it and tell teacher
How do you stabilize you wood peace.
clamps
Who lives in the pineapple under the sea.
nobody
In a wood right triangle if the opposite side is 3 and the adjacent side is 4 what is the ratio of tanθ.
3/4
When using the lathe why is it important your work peace is center into the machine.
It doesn't go flying
What do you get when you go into the wood shop.
safety glasses
What do you use to put nails in wood
hammer or nail gun
What kind of wood was used for the plank under F1 cars?
Jabroc or beechwood