Show:
Safety
Tools
Measuring
Wood ID
Miscellaneous
100

What should be worn at all times while in the shop?

Safety Glasses

100

What machine is used to straighten one edge of a board?

The Jointer

100

What is the 2nd largest line on a tape measure?

1/2 Inch

100

This wood is a softwood that typically has long grain patterns and knots. Its often yellow in color and is relatively cheap. 

Pine

100
Which edge of a piece should be jointed?
The edge that touches on the ends but not in the middle. 
200

What is it called when a piece of wood binds in the saw, causing the piece to fly backwards?

Kickback
200

What machine is used to flatten the face grain and/or control the thickness of a piece?

The Planer/Surfacer

200

How many 8th lines are in 1 inch?

8

200

This wood is a hardwood known for its durability, smooth texture, and grain pattern. Most often used in flooring, furniture, and musical instruments.

Maple

200

What machine should be used to create a profile on the edge of a board?

The Router

300

What is the correct way to make a cut with the Miter Saw?

Pull out, Turn on, push down, push back

300

What tool is used when needing to check if a piece is square on the end?

Square

300

What is the smallest line after 1/2"

9/16"

300
This is a hardwood known for its rich dark brown color, distinct grain patters. Its often used for flooring, furniture, and other high end woodworking projects.

Walnut

300

When making a picture frame, what degree should the miter saw be set to?

45 Degrees

400

What is the safety margin that should be observed when using the Table Saw? 

6 Inches

400

What tool could be used to set nails beneath the surface of the wood? 

A punch
400

What is half of 3/8"

3/16th Inch

400
This is a hardwood that is known for its bright orange color which darkens over time. It is really heavy, and can be found in central and tropical parts of west Africa.

Paduk

400

When using the router which direction should you feed the material?

Against the rotation of the blade

500

When changing the blade, what steps should be taken to ensure you are doing it safely?

Turn it off, Wait for the Blade to stop rotating, and unplug the machine.

500

What tool can be set to ensure multiple pieces have the same overhang?

Combination Square

500

When measuring the thickness of a board that is less than 1" thick, what is the recommended way to get an accurate measurement? 

Kill an inch

500

This wood is a softwood with a straight and uniform grain pattern. It is lightweight ad typically light-colored when fresh but can darken over time. It is usually full of knots. 

Alder

500

What is the name of the joint cut through the piece that does not run along the edge?

Dado Joint