Walking and Work Surfaces
Unguarded floor/wall openings, platforms, loading docks, roofs, stairs, ladders/scaffolds.
What are places you can fall from?
Name three things that should be inspected on a fire extinguisher.
What is: the gauge is in the green, the pin is in place and sealed, and it is not blocked
An SDS must be kept on every one of these in a workplace
What is chemcial?
What is a Class A Fire?
Normal combustibles: wood, paper, trash etc.
What you should do whenever you see an unsafe condition in the workplace
Fix it if you can or report it
Can lead to injuries when workplace isn't kept clean and orderly, spills are left behind, hoses aren't wound up.
What is poor housekeeping?
Name something that should be inspected on a eye wash station.
Sealed and full; Expiration date; not damaged
The D is SDS
What is DATA?
Who fills out and reviews a hot work permit? Name some components of a hot work permit.
Who are the person doing the work and the job site supervisor/foreman. Type of work, hazards, precautions/prevention steps, fire watch, emergency contact information, evacuation signal and routes, location and type of fire extinguishers/FF equipment.
Required before performing a task?
What is an FLHA
When three of your four limbs are in contact with the ladder at all times
What is the 3-Point Contact?
Identify two things that should be checked during a ladder inspection.
Rungs and braces, rails and spreaders are not damaged, feet are not missing, Rust/corrosion, rivets damaged/missing
Name two subjects on any SDS
What are: Manufacturer, use, components of, chemical, fire and medical hazards, safe handling, exposure routes, prevention of and treatment for exposure, firefighting. emergency contact phone numbers
What is all Letters in PASS Stand for
Pull Pin, Aim, Squeeze, Sweep
An incident that does not result in a serious injury.
What is a First Aid or Near Miss?
Workers injured in falls from this object are usually less than 10 feet above the ground.
What is a ladder?
What is a MEWP and how often should it be inspected?
What is Mobile Elevated Work Platform (boom/aerial or scissor lift)? When is before each use?
Where do you access SDSs on your job site.
Tool Crib or the safety office
Name the three components required to support a fire
Oxygen, Fuel, Heat.
Loose carpets, mats, or materials on the floor.
What is a trip/fall hazard?
At what height is dropped object control measures required on work decks? Name 3 of the controls?
What is 1.2 meters of 4ft. What are toe boards, mesh, and tethers.
How often should a job site safety inspection take place?
When is daily or before each shift?
What is the term for a cancer-causing chemical?
Carcinogen
What is a Class D fire?
Metals: magnesium, beryllium, titanium, aluminum
The first person to go with safety-related questions or concerns.
Who is your Supervisor?