General Safety
This is the reason we ask employees to report all injuries, incidents, and near misses.
What is to prevent future incidents?
Three things that should be inspected monthly on a fire extinguisher.
Any three of the following:
What are: (1) the pressure gauge is in the green, (2) the pin is in place and sealed, (3) the hose is not blocked, and (4) it is dent-free
The P in PASS.
What is pull pin?
According to OSHA, the "point of operation" on a machine is _______________.
What is the area where work is actually performed on the material being processed?
You are required to keep an SDS for these items in your workplace.
What are chemicals?
Whenever you see an unsafe condition in the workplace you should do this.
What is report it?
Eye wash stations should be checked for ____________.
What is proper flow?
What is mold?
Smoke detectors should be checked this often.
What is once a month?
The point of operation on a machine should always be ______.
What is guarded?
The "d" in SDS stands for ______.
What is data?
This government agency is responsible for regulations which keep employees safe on the job.
What is OSHA (OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION)?
You are looking for these when inspecting a ladder.
What are damaged rungs?
What are missing feet?
The first S in PASS
What is SQUEEZE?
This is one example of a machine guard.
What is a fixed barrier?
What is distance?
What are lights, curtains, or interlocks.
You should always do this before handling chemicals.
What is wear proper PPE?
When lifting a heavy object, the back should be kept _____________________ and the knees should be _________________________.
What are straight and bent?
All chemicals in your area should be.
What are Properly labeled and have an SDS?
These three components are required to create a fire.
What is fuel, heat, and oxygen?
Prior to entering the point of operation, the machine shall be __________.
What are locked out and tagged out (LOTO)?
This term is used for a cancer-causing chemical.
What is carcinogen?
__________ is the study of how to design the workplace to fit the needs of the workers, with the goal of reducing the risk of injury and increasing efficiency.
What is ergonomics?
Electrical cabinets require _____ of clearance in front of them.
What is 3ft?
These four actions make up the P-A-S-S method for fire extinguisher use.
What are pull, aim, squeeze, sweep?
This type of employee is allowed to perform a lock out tag out.
What is an authorized employee?
This is a United Nations-managed standard for classifying and labeling chemicals based on their health, physical, and environmental hazards.
What is the globally harmonized system or GHS?