General Safety
We ask employees to report all injuries, incidents, and near misses for this reason.
What is to prevent future incidents?
At least 4 things that should be inspected monthly on a fire extinguisher.
Any three of the following:
What are: (1) the pressure gauge is in the green, (2) the pin is in place and sealed, (3) the hose is not blocked, and (4) it is dent-free (5) inspection tag is filled out and correct for the current year/time (6) mounted off the ground (7) labelled above the extinguisher
The P in PASS stands for this _______________.
What is pull pin?
Using a blue lock to lock open a door and maintaining control of the key on your person/in your pocket
What is a Mode 2 task?
Church & Dwight is required to keep an SDS for these items in your workplace.
What are chemicals?
You should do this whenever you see an unsafe condition in the workplace.
What is report a near miss by QR code and to a coordinator?
Emergency Eye wash/shower stations should be inspected weekly for _(multiple)__.
What is accessibility, proper flow, signage, activation works, nozzle/eye caps, clean, inspections tags filled out, any damage or malfunctions
Where flammable chemicals should be stored when not in use.
What are flammable storage cabinets?
The point of operation on a machine should always be ______.
What is guarded?
The "D" in SDS stands for ______.
What is data?
This government agency is responsible for regulations which keep employees safe on the job.
What is OSHA (OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION)?
You are looking for these when inspecting a ladder.
What are damages to rungs, side rails, steps, missing or misaligned feet/grips, missing labels, etc.
The first S in PASS stands for this ______.
What is SQUEEZE?
This is one example of a machine guard.
What is a fixed barrier?
What is distance?
What are lights, curtains, or interlocks.
You should always do this before handling chemicals.
What is wear proper PPE?
When lifting a heavy object, the back should be kept _____________________ and the knees should be _________________________.
What are straight and bent?
These things should be done before using equipment (PPE, Forklift, Harnesses, etc.)
What is pre-use/pre-operation inspection?
The best ways to prevent a fire in the workplace?
What are Regular cleaning, not overloading electrical circuits, proper chemical and flammable material storage, (any other examples)
This is required to be done by every person participating in a changeover
What is full locked out and tagged out (LOTO)?
This term is used for a cancer-causing chemical.
What is carcinogen?
__________ is the study of how to design the workplace to fit the needs of the workers, with the goal of reducing the risk of injury and increasing efficiency.
What is ergonomics?
Electrical cabinets require _____ of clearance in front of them.
What is 36 inches?
These three components are required to create a fire.
What are fuel, heat, and oxygen?
What is the term for when a machine is running product or capable of producing product?
What is Manufacturing Mode?
This is a United Nations-managed standard for classifying and labeling chemicals based on their health, physical, and environmental hazards.
What is the globally harmonized system or GHS?