General Safety
Why do we ask employees to report all injuries, Incidents, and near misses?
PREVENTION- to prevent future incidents
Name three things that should be inspected on a fire extinguisher.
what is the guage is in the green, the pin is in place and sealed, and it is not blocked
The P in PASS
Pull PIN
The point of operation of a machine is defined by OSHA as?
where the work is being done within the machine
An SDS must be kept on every one of these in a workplace
What is chemcial
What you should do whenever you see an unsafe condition in the workplace
What is REPORT IT?
Name one things that should be inspected on a eye wash station
proper Flow
The pathway to your designated exit is known as
egress route
The point of operation should always be
Guarded
What does SDS stand for?
Safety Data Sheet
The government agency responsible for regulations which keep employees safe on the job
What is OSHA OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
what is one things that should be checked during a ladder inspection
rungs are not damaged, feet are not missing
The first S in PASS
What is SQUEEZE?
What is one example of a machine guard
fixed barrier, Distance, Light curtains or interlocks etc
What does GHS Stand for?
Globally harmonized System
How often must a safety harness be inspected?
Before every use and annually
All chemicals in your area should be.
Properly labeled and have a SDS #
Name the three components required to support a fire
Oxygen, Fuel, Heat.
Prior to entering the Point of operation the machine shall be?
LOTO
Where can you find all SDS at CWP?
SDS Binder or shared drive
Where can the Emergency Action Plan be found?
breakroom or shared drive
Electrical cabinets require how big of an area to be clear in front of them?
3ft
What do the letters in PASS stand for?
Pull, Aim, Squeeze, Sweep
An employee that is allowed to perform LOTO is?
AUTHORIZED Employee
What is the term for a cancer-causing chemical?
Carcinogen