General Safety
The person who has the skills to recognize a hazard and the authority to take corrective action
What is a competent person
Three groups that are required on an Enclos jobsite safety inspection
what is operations, field supervision, and random field employee
The P in PASS
What is: Pull PIN
The documents required for an architect to get on an Enclos MEWP.
What is hold harmless, fall protection training, and equipment specific training.
SDS are kept for these on a jobsite
What are hazardous chemcials
The minimum distance required between a piece of equipment and a power line without taking other actions
What is 20 feet
Every Enclos gang box should have this in it along with the first aid kit.
What is eye wash.
The time between fire extinguisher inspections.
What is once a month, annual recertification
This task must be performed prior to using any MEWP.
What is the pre shift inspection
The D is SDS
What is DATA?
The government agency responsible for regulations which keep employees safe on the job
What is OSHA OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION
The person in charge of assembling a crane
What is the assembly/disassembly director
The first S in PASS
What is SQUEEZE?
MEWP's that stay vertical within the tipping lines
What are group A MEWP's or scissor lifts
GHS Stands for this.
What is Globally harmonized System
The type of fall protection equipment used for tying off at foot level
What is leading edge sharp fall protection equipment
Chemicals in containers on the jobsite need the following.
Properly labeled and have a SDS #
The three components required to support a fire
Oxygen, Fuel, Heat.
The point on the MEWP where the fall protection equipment is attached to.
What is the anchorage point
The location of all the information on hazardous chemicals on a jobsite.
What is the SDS Binder located in the field office
The process of designing or arranging workplaces, products and systems so that they fit the people who use them to prevent MSD's
What is ergonomics?
Electrical cabinets have this required clearance.
What is 3 feet
PASS is the acronym for.
Pull Pin, Aim, Squeeze, Sweep
The process of retrieving an employee from a MEWP
What is a rescue
Required on every chemical container on site
What is a proper label