Blend method means, both _______ and __________ are available at the needle separately or together.
galvanic and thermolysis
The chemical action of sodium hydroxide on the tissue is sped up by_______.
heat highfrequency
area of the body that is more susceptible to pitting and depressions
the face
the working point of manual technique is usually found between the duration of
3 - 20 seconds
the blend requires the use of both poles to
complete the circuits
negative-needle / positive-patron
Explain the main advantage of using high frequency current in the blend method
High-frequency current is a fast acting current
The production of lye is enhanced by high-frequency current because high-frequency current:
coagulates (heat) the tissue around the needle so that the lye solution can diffuse
the main factor limiting the operators speed in body work is
the clients pain tolerance
it's a use of galvanic current (DC) and low-intensity high-frequency currents for hair removal
when removing very deep terminal hairs with a blend method you will approximately need
80 units of lye
During the blend method, the nerve endings are coagulated by the action of ______
high-frequency
If applied at intensities below those which cause moisture to boil away, high-frequency heating will ________ tissue
coagulate the tissue
Working on the body the electrologist can
can use a higher amount of HF current than working on the face
Name an important factor in the use of the blend is
correctly proportioned relationship between currents
Settings
High-frequency current which primarily determines
the length of time to apply blended currents
Due to the heated action of high - frequency, the blend requires _________ amount of galvanic lye
1/4
Successes of the blend in all types of problem treatments is due to its
easy adjustment to different intensity combinations
when galvanic current meets with body salts and tissues moisture, it creates
During blend treatments, your milliampere meter should indicate a reading equal to
units of lye divided by seconds
As the evacuated follicle contracts around the fluid, it exposes its entire target area from the papilla to the hair germ cells to the affects of
Lye (sodium hydroxide)
The blend effects permanent hair removal by
radio frequency RF (HF) and galvanic current
what is the lead in starting the currents
the footswitch