Technician 101
Corrected using a single strike with your initials and date
What is how to correct a recording error?
Operating type where the component is connected to a wiring harness but not operating
What is Operating type 1.2?
This tool is creates a low resistance path for current to pass, it then can easily be measured.
What is a shunt?
Sort, Set, Shine, Standardize, Sustain
What are the 5S philosophies?
The RMS in Grms
What is ROOT / MEAN / SQUARE?
What the acronym DVP & R stands for.
What is Design Verification Plan and Report?
I/Jobs/Specs (Obsolete)(Reference)
Where you can find current library of test specifications?
This is set to assure your environmental chamber does not exceed a temperature extreme?
What is a product saver (Red Lion)?
The last line of defense to protect the safety of the employee
What is Personal Protective Equipment (PPE)?
Resistance is used in DC systems; this is it's equivalent for AC systems
What is Impedance?
Duration in hours to communicate to the client of a testing failure
What is 24 hours from discovery?
The area of the specification that determines if the DUT meets or does not meet expectations.
What is the acceptance criteria?
This piece of equipment is an electronic device that is capable of producing a repeating or non-repeating waveform.
What is a signal generator?
Only the person whom applied it can remove it
What is a Lock Out Tag Out (LOTO) lock?
This consists of two wire legs made from different metals to measure temperature.
What is a thermo couple?
The TMAX of a walk in chamber?
What is 100C?
PV
What is Production Validation?
This piece of equipment is commonly used to display and analyze the waveform of electronic signals
What is an Oscilloscope?
You can't bring this into the lab without approval and SDM review
What are chemicals?
An electrically operated switch that is activated by a current or signal in one circuit to open or close another circuit
What is a relay?
This is checked at the connector end, typically with a DMM
What is voltage output?
Typically, this vertical chart contained in the specification shows the path of testing the product must complete
What is the test flow?
For this type of resistance measurement, the voltage is measured at the DUT, voltage drop in the test leads is eliminated
What is a four wire resistance measurement?
The app where you find Intertek training modules
What is 10X Way Learning?
V=R/I
What is Ohms Law?