A TD pipette is calibrated to do what with its stated volume?
Deliver it
In which delivery mode does liquid drain under its own weight?
Gravity drain.
Which aspiration speed should be used for pipettes up to and including 5 mL?
LOW
What does TC stand for?
To Contain
Which delivery mode requires expelling the remaining liquid from the tip?
Blow-out.
What aspiration speed should you select for a 2 mL pipette?
LOW
What normal liquid behavior is accounted for in the calibration of a TD pipette?
A small amount of liquid normally remains on the inside wall after proper delivery.
When using gravity drain, what should you do with the residual liquid in the tip?
Leave it there; do not force it out.
What aspiration speed should you select for a 10 mL pipette?
HIGH
What should you consult if a pipette's markings or delivery instructions are unclear?
Manufacturer's instructions.
What should happen before the final expulsion when using a blow-out pipette?
Normal gravity drainage.
What happens when you press the aspiration trigger farther?
Liquid is drawn into the pipette faster.
What do TD and TC describe about a pipette?
Its calibration and intended volume relationship.
What can happen if you use blow-out technique on a gravity-drain pipette?
You may deliver more than the calibrated volume, resulting in inaccurate measurements.
Why might using a faster aspiration speed than necessary create problems when handling a small volume?
It can make liquid uptake harder to control and increase the risk of overshooting, splashing, or drawing liquid too quickly.
Question:
Two employees are preparing to dispense liquid using the same 10 mL Fisherbrand serological pipette. The pipette has a double band near the top indicating that it is a blow-out pipette.
Neither employee has selected both settings correctly. Identify the correct settings and explain why.
The correct settings are HIGH aspiration and BLOW-OUT dispense.