FALL PROTECTION
ANCHORS
HARNESS & LANYARDS
HEIGHTS
DEFINITIONS
100
6 FEET
What is HEIGHT THAT FALL PROTECTION IS REQUIRED IN CONSTRUCTION
100

In the ABC's of Fall Protection, What does the letter "A" stand represent? 

Anchor Point 

100
NIPPLE HEIGHT
What is PROPER LOCATION THAT YOUR BUCKLE SHOULD BE F YOUR HARNESS IS ON CORRECTLY
100
18 TO 19 FEET
HOW HIGH OFF THE FLOOR DO YOU HAVE TO TIE-OFF TO STOP IF YOU FALL WITHOUT HITTING THE FLOOR
100

Means of any condition on a walking-working surface that exposes an employee to a risk or harm from a fall on the same level or to a lower level. 

What is a fall hazard 

200

Hazard Elimination, Passive Fall Protection, Fall Restraint, Fall Arrest and Administrative Controls

 What is the hierarchy of controls in fall protection 

200
BEAM CLAMP
What is TYPE OF ANCHOR THAT SHOULD BE USED IN A STEEL STRUCTURE
200

Must be present and legible  

What are inspection tags.

200
42" +/- 3"
HOW HIGH DOES A HAND RAIL HAVE TO BE POSITIONED
200

Supported, Suspended and Aerial Lifts 

What are the three types of scaffolds 

300

What do harnesses, lanyards, connectors have in common 

What are items that need to be inspected every time before use. 

300
5000
What is AMOUNT OF WEIGHT THAT AN ANCHOR OR A RETRACTABLE LANYARD MUST SUPPORT
300
CENTER OF YOUR BACK BETWEEN YOUR SHOULDER BLADES
What is CORRECT THAT YOUR D-RING SHOULD BE IF YOU ARE WEARING YOUR HARNESS CORRECTLY
300
4"
HOW HIGH DOES A TOE-BOARD NEED TO BE
300

2 inches in it least dimension 

 What is a gap or opening in a floor, roof or walking-working surface 

400
1800LBS
What is LIMITED ARRESTING FORCE WHEN A WORKER WEARS A HARNESS
400
THE HIGHTEST POINT ABOVE YOUR HEAD
What is HEIGHT REQUIREMENT FOR ATTACHING A ANCHOR DEVICE
400
SNUG BUT NOT TIGHT, BUT NOT LOOSE
What is PROPER WAY TO ADJUST YOUR LEG STRAPS WHILE WEARING YOUR HARNESS
400

What is the clearance beneath at toe board or kick?   

1/2 inch 

400

4":12" or less ratio  

What is a low slope (pitch) roof.

500

The duty to have fall protection.

What is the duty of the employer 

500
MAKE SURE YOUR ARE TIED OFF CORRECTLY TO A PROPER ANCHOR POINT THAT COULD STOP YOU IF YOU FELL
What is THE RESPONSIBILITY OF YOUR COWORKER TO ASSIST YOU IN TYING OFF BEFORE YOU WORK
500

EVERYTIME YOU WEAR IT

HOW OFTEN SHOULD YOU INSPECT YOUR HARNESS

500
5'11"
HOW HIGH DO YOU HAVE TO BE TO NOT USE FALL PROTECTION
500

One who by possession of a recognized degree, certificate, or professional standing.  

What is a qualified person

M
e
n
u