Safety First
What does LOTO stand for?
Lockout/Tagout
What do the channel brushes help control?
The amount of fruit feeding through the channels into the cups.
What happens at stations E1, E2, and E3.
E1 forms the bag, E2 fills it, and E3 Final weld.
Which packaging material forms the main part of the bag?
Mesh
Which machine checks the weight of the finished bag?
The checkweigher.
What hazardous energy sources can be found on GIRO equipment?
Electrical, pneumatic, mechanical, thermal
What does emptying with zeroing accomplish?
It empties the cups and re-establishes their empty-weight reference.
Which components grip and advance the film and mesh to the set bag length?
Drive rollers
What supplies the ink used by the E-300 printer?
The ribbon.
Which request is used for a maintenance issue requiring immediate attention?
ER, Emergency Request.
Who normally removes an employee’s personal lock?
The employee who applied it. (yourself)
When setting up the PDG what does tolerance mean?
It helps to reach close to the target weight
What detects the registration mark on the film to help align the film for welding and cutting?
UV/ spotless sensor
When do you consume materials?
When you get material from the pallets.
What two key details must a maintenance request include?
The asset number and a clear description of the issue.
Does pressing an E-stop replace the required LOTO procedure?
No. An E-stop does not isolate all hazardous energy.
How many cup bars does the PDG weigher have?
27
What helps settle the fruit inside the bag during filling?
The bump table.
What is splicing?
Joining the end of the current film to the beginning of a new roll so it follows the existing route.
What should you use to clean photocells(sensor) and reflectors?
A clean rag slightly dampened with water. No chemicals or abrasive materials.
What should you do if an interlock guard is damaged or not working?
Stop using the affected equipment and report the issue. Never bypass the interlock.
What do the channel brushes help control?
The amount of fruit feeding through the channels into the cups.
Which bag format uses vertical welds?
ULTRABAG.
What three things must you check on a test bag after a changeover?
Correct weight, correct batch, and seals.
What information do you need to consume material?
The batch number, the material’s LPN, and the batch’s actual quantity.