P.P.E
This type of glove should be worn when stripping cable to protect against potential cuts and abrasions.
What are cut-resistant gloves?
Every Jobsite requires this person in order to perform work.
What is a "PMCow" or Person Managing Control of Work
This is the standard that defines the requirements for electrical PPE in the U.S.
What is NFPA 70E?
Who has the authority to use STOP WORK?
Everyone
What is the designation for safety glasses that meet the ANSI standards for impact resistance and are approved for use in industrial settings?
What are Z87 safety glasses?
What is the maximum duration for a Work Permit before revalidation is needed?
12 hours.
According to the National Electrical Code (NEC), what is the maximum fill percentage of a conduit when it contains three or more wires?
what is 40%
This document should be filled out as an group prior to starting work each day and should be updated throughout the day as conditions change.
What is a JSA.
This document should be filled out by drivers every Monday morning prior to travels.
What is Vehicle inspection.
This device should be worn within 6" - 9" of your breathing zone.
What is an H2S monitor.
This is used to remind operators to check for overhead powerlines before operating equipment.
What is a "Look Up and Live" flag
______ is the approach distance to exposed, energized electrical components within which a shock hazard exists.
What is Limited Approach Boundary. Also Known as (LAB) for Chevron.
The following gas is heavier than air, can smell like rotten eggs, and can be a byproduct of Hydrocarbon production.
What is Hydrogen sulfide or H2s
You can find policies and procedures in this area of KPA.
What is the Resource's
This material is commonly used in arc-rated clothing to protect against arc flash
What is flame-resistant fabric?
This safety procedure should be completed just prior to starting work with significant risks and involves a walk-through at the task location.
What is a Start Work Check?
In electrical classification, what is an area where flammable gases, vapors, or liquids are present under normal operating conditions or may be released frequently, posing a high risk of ignition?
What is Class 1, Division 1 (Class 1, Div 1)?
According to multiple sources, this is the most dangerous aspect of working in the Permian Basin.
What is driving.
In what year was the last time the Cowboys won a Superbowl?
1996
This testing frequency is required for rubber insulating gloves and sleeves used in electrical work.
What is every 6 months?
What other documentation is needed beside an permit to work and JSA when working on energized electrical equipment?
Planning Phase Hazard Analysis or PPHA
In electrical classification, what is an area where flammable gases, vapors, or liquids are not normally present during regular operation but could appear under abnormal conditions?
What is Class 1, Division 2 (Class 1, Div 2)?
A _______ is an unplanned event that could have resulted in injury, damage, or loss, but did not because of chance, corrective action, or timely intervention.
Near Miss